Zoom X7N User Manual page 77

•
Autodetect may not be able to detect your connection. In this
case you may need to manually configure your connection.
See Chapter 1 for configuring your connection manually.
Problem
My computer/devices are not connecting wirelessly to the X7N.
Solution
Try the following:
•
Check your wireless security settings on your X7N and verify
that your device is using the same settings.
•
Check the signal strength of your wireless connection. Most
wireless adapters have some type of signal strength meter that
shows how strong your wireless signal is. Windows users,
click the Wireless icon in your system tray to check signal
strength. If your signal strength is not strong enough, try the
following:
Reorient the receiving antenna on your X7N.
Move the X7N to another area.
Move the device trying to access the X7N to a
different location, ideally closer to the X7N.
•
Change the wireless channel. In the unlikely event that you
experience performance issues with your wireless network,
you may want to set your network up on a channel that's
different from the factory-set channel of 10. To do that,
follow these steps:
1
Open the Zoom Configuration Manager by
entering the following in your Web browser's
address bar:
2
In the Enter Network Password dialog box,
type the following User Name and Password in
lower case, then click OK.
User Name: admin
Password: zoomadsl
Appendix A: Troubleshooting Tips
http://192.168.1.1
77