(The User Name and Password entered here are
not the same as the user name and password that
your Internet service provider may have given
you.)
3
On the Basic Setup page, click Wireless on the
left-side menu to open the Wireless page.
4
On the Wireless page, from the Channel drop-
down menu, select a different channel, such as 1
or 6.
5
Be sure to click Save/Apply after you change the
channel. All devices connecting wirelessly to the
X7N will automatically switch to the new channel.
Problem
When I run the Zoom Install Wizard it reports that my DSL
modem is not found.
Solution
•
Verify that your X7N is powered on. The Power led should
be on.
•
You are using Windows Vista or Windows 7 and Telnet is not
enabled.
To enable Telnet:
1
Click Start, select Control Panel, then double-
click Programs and Features.
2
In Programs and Features, in the Tasks pane,
click Turn Windows features on or off.
Vista users only: At the User Account
Control message, click Continue.
3
In the Windows Features dialog box, select
Telnet Client, click OK, and wait while the
feature is configured. This normally takes about
2 minutes.
Appendix A: Troubleshooting Tips
X7N User Manual