Zoom X7N User Manual page 80

If you are using a Windows computer, power off your
computer, then power it back on.
Problem
The computer on which I initially installed the X7N on is
connected to the Web, but devices connected wirelessly to the
X7N are unable to connect to the Internet.
Solution
•
Try powering off then powering on each device on your
network.
•
Verify that the devices on your wireless network are using
Dynamic Host Configuration Protocol (DHCP). This is also
known as dynamic IP addressing. Depending on your device,
this may be controlled by an Obtain an IP address
automatically option. If you need help, refer to the
documentation that came with your network device or
contact its manufacturer. If you are using a Windows, Mac or
Linux computer, refer to
Settings on page 90 for directions on configuring your
computer for DHCP.
•
Your problem might be in the wireless connection. Try the
steps in My computer/devices are not connecting
wirelessly to the X7N
Problem
The computer on which I initially installed the X7N on is
connected to the Web, but the computers connected through my
network device cannot access the Internet.
Solution
The problem is most likely with your network device (such as a
wireless access point, router, hub, or switch). Check these items:
•
Try rebooting each computer on your network. For example,
if you are using a router, reboot each computer that is
connected to the router. This will allow for the computers to
release and renew their IP addresses.
Appendix A: Troubleshooting Tips
Appendix D: TCP/IP Network
troubleshooting tip on page 77.
X7N User Manual