Zoom X7N User Manual page 79

4
In the Uninstall or Change a Program
window, click the Close box to exit.
•
You unplugged some other ADSL modem, a
router, or some other Ethernet device from your
computer and then did not power-cycle your
computer. If this applies to you, try turning your
computer off and then on. This ensures that your
computer gets a correct IP address from the X7N.
•
Your Zoom modem's Ethernet cable is not
plugged in properly or is defective. Please check
this cable.
•
Your computer is set to use static IP addressing.
This needs to be changed to Dynamic Addressing
to use the Install Assistant, and you can later go
back to static IP addressing if that is appropriate.
To use Dynamic Addressing for the Install
Assistant, see Windows TCP/IP Settings in
Appendix
Problem
I cannot log into the Zoom Configuration Manager. I have
typed http://192.168.1.1 but I am not prompted for a User Name
and Password.
Solution
There are several issues that could cause this problem. Check these
items:
•
If you are using a Macintosh computer, your TCP/IP settings
may not be properly configured. See page 90 for more
information.
•
If you are using Mac OS X 10.3 and above, renew your IP
address: Point to System Preferences, then choose
Network. Click the Configure button and then the Renew
DHCP Lease button.
Appendix A: Troubleshooting Tips
D.
79