Zoom X7N User Manual page 93

5
In the Local Area Connection Properties dialog box,
highlight Internet Protocol Version 4 (TCP/Ipv4) and click
the Properties button.
•
If you are using DHCP (most users): Ensure that
Obtain an IP address automatically is selected and
that either Obtain a DNS server address automatically
or Enable DNS is selected. All fields should be blank.
•
If you are using a static IP address: Ensure that Use
the following IP address and Use the following DNS
server addresses are selected, and that the correct IP
address, Subnet mask, Default gateway, and
Preferred DNS server values appear.
6
Click OK, then click Close.
7
Re-enter 192.168.1.1 in your Web browser's address bar.
Windows XP
1
Open the Internet Protocol (TCP/IP) Properties dialog
box.
a
From the desktop, click the Start button, point to Control
Panel, and then click Network and Internet
Connections.
b
Click Network Connections.
c
Right-click the Local Area Connection icon, and select
Properties.
d
Select your NIC card's TCP/IP entry (it should include
"TCP/IP" in it, but not "AOL," "Dial-up," or "Adapter")
and click the Properties button.
2
Ensure the following is selected, depending on whether you are
using dynamic (DHCP) or static IP addressing:
•
If you are using DHCP (most users): Ensure that
Obtain an IP address automatically is selected and
Appendix D: TCP/IP Network Settings 93