Setting Up The Panel Screen With The Accessory Bracket - Yaesu FTM-400DR Operating Manual

Setting up the Panel Screen with the accessory bracket.

Set the Panel Screen up with the accessory bracket.
Precaution
• The bracket can be shaped by hand to fit where the Panel Screen is to be set. Be careful not to
injure yourself when manipulating the bracket into the desired shape.
1
Choosing where to set the Panel Screen.
Decide where to set the Panel Screen.
2
Attach the bracket to the Panel Screen.
As shown on the figure, attach the bracket to
the panel using the enclosed screws.
3
Attach the bracket using double-sided
adhesive tape.
Remove the protective film on one side of the
enclosed double-sided adhesive tape and
paste it to the bottom of the bracket.
4
Attach the Panel Screen to the desired
location.
Remove the protective film on the remaining
side of the double-sided adhesive tape
and paste the Panel Screen to the desired
location of the vehicle.
FCC ID:
IC: 511B-20345X40
Attaching Accessory Items
K6620345X40
11