Switching Between Time And Voltage Display; Adjusting Volume Respectively To A/B Bands - Yaesu FTM-400DR Operating Manual

Setup Menu

Switching between Time and Voltage display

The display on the top right of the screen can be switched between [Time Display] and
[Voltage Display].
1
Press and hold M over 1 second.
The Setup Menu appears.
2
Tap [DISPLAY].
3
Tap [6 TIME/VDD] and select the display content.
The display switchws between [TIME] and [VDD]
every time [6 TIME/VDD].
TIME: The Time appears.
VDD: The voltage appears.
4
Press and hold M over 1 second.
The display content is set and the screen returns to
the precious one.
Reference • Factory Setting: [TIME]

Adjusting volume respectively to A/B Bands.

The volume for A Band and B Band can be separately adjusted. Additionally, if your
radio is connected to external speakers, the A/B Band Audio can be separated to left
and right speakers.
1
Press and hold M over 1 second.
The Setup Menu appears.
2
Tap [TX/RX].
3
Tap [AUDIO].
4
Tap [1 MIX/ SEPERATE] and select
Audio is switched between [MIX] and [SEPERATE]
each time [1 MIX/SEPERATE] is tapped.
MIX: Simultaneously adjust volume for A Band and B
Band.
SEPERATE: Separately adjust volume for A Band and
5
Press and hold M over 1 second.
The selected volume adjustment is set and the screen
returns to the previous one.
Reference • Factory Setting: [MIX]
62
B Band.
.
FCC ID: K6620345X40
IC: 511B-20345X40