Memory Dual Reception; Memory Channel Home Channel; Using The Dtmf Function - Yaesu FTM-400DR Operating Manual

Dual Reception (DW) Functions

Memory Dual Reception

→
Memory channel
1
Switch to Memory Mode.
2
Adjust to the memory channel to recieve.
Adjust to the memory channel to receive using O
knob.
3
Press F shortly.
The Function Menu appears.
4
Tap [DW].
If [DW] is not displayed in the function menu, tap
[NEXT].
5
Dual reception starts.
The signal of home channel is received around every 5 seconds.
When a signal of the home channel is received, the frequency changes to that of the
home channel.
To cancel the dual reception, press F shortly again and tap [DW].
Precaution
Make sure to set home channel prior to using memory dual reception.
Reference
• If a signal of dual reception is received , it's frequency is received for 5 seconds and then dual
reception resumes. Even while receiving the home channel, dual reception can be canceled by
pressing [PTT] on the microphone and can perform transmission using that frequency.
• The operation to perform when dual reception is running can be set in the [SCAN] → [1 DUAL
WATCH STOP] of the Setup Menu.

Using the DTMF Function.

"DTMF (Dual Tone Multi Frequency) tones" refer to the tones (beep boop beep) heard
from the receiver of the push-button phone. You can register the telephone number for
phone patch connection to the public telephone line, etc. with a DTMF code comprising
up to 16 characters (for up to 9 channels).
1
Press ad hold M over 1 second.
The Setup Menu appears.
2
Tap [SIGNALING].
3
Tap [4 DTMF MEMORY].
The DTMF Memory screen appears.
Reference This can also be selected by pressing the O.
42
Home Channel
FCC ID: K6620345X40
IC: 511B-20345X40