Yaesu FTM-400DR Operating Manual page 37

Using the Scanning Function
● Setting the Scan Method.
The scanning method to scan all memory channels or only selected memory channels
can be set in the Setup Menu.
• ALL MEM: Scans all memory channels
• SELECT MEM: Only scans selected memory channels
1
Press and hold M over 1 second.
The Setup Menu appears.
2
Tap [MEMORY].
3
Tap [MEM SCAN TYPE] and then select
[SELECT MEM].
The scanning method switches between [ALL MEM]
and [SELECT MEM] each time [MEM SCAN TYPE] is
tapped.
Reference • The scanning method can also be selected by
pressing the O.
4
Press and hold M over 1 second.
The scanning method is set and the screen returns to the previous one.
● Specifying a Skip/Selected Memory Channel
You can specify two types of memory channels to scan: memory channels to skip and
selected memory channels to scan, for effective memory scanning.
Skip memory channel: You can specify memory channels that need not be scanned
during memory scanning.
Selected memory channel: When [MEM SCAN TYPE] is set to [SELECT MEM], only the
specified memory channels are scanned during memory scanning.
Memory channels to skip and selected memory channels to scan can be specified in the
2 methods following.
(1) Collectively select memory channels in the Memory Write screen.
(2) Individually select memory channels when scanning.
(1) Collectively specifying memory channels in the Memory Write screen.
1
Press and hold F over 1 second.
The Memory Write screen appears.
2
Tap the memory to select.
Select memory by tapping it.
3
Tap [SKIP/SEL].
The scanning method switches between [SKIP],
[SELECT], and [OFF], each time [SKIP/SEL] is
tapped.
• The scanning method can also be selected by pressing the O.
Reference
• To continue selecting memory channels, repeat steps 2 through 3.
36
FCC ID: K6620345X40
IC: 511B-20345X40