Yaesu FTM-400DR Operating Manual page 41

Searching for a Signal Using a Signal Strength Graph
Band Scope Function
During mono band reception in the VFO mode, use states of channels (strengths of
channel signals) around the current frequency set as center [▼] can be graphically
displayed on screen.
1
Tap [V/M].
The mode switches to Mono Band.
2
Tap [SCOPE].
The SCOPE screen appears.
3
Turn the O knob to move the ▼ icon to the signal
position.
The signal at the center frequency can be received.
4
Tap [SCOPE].
The Band Scope is deactivated.
Reference
• When band scope channel is ± 5, numeric values representing
signal strengths are displayed in the graph.
• The band scope channel interval is the same as the VFO
frequency step.
• The band scope channel interval can be changed in Setup
Menu, [Display] → [3 BAND SCOPE].
40
FCC ID: K6620345X40
IC: 511B-20345X40