Ftm-400Dr Specifications - Yaesu FTM-400DR Operating Manual

General
Frequency Range:
Channel Steps:
Mode of Emission:
Antenna Impedance:
Frequency Stability:
Operating Temperature Range:
Supply Voltage:
Current Consumption (Approx.):
Case Size (W × H × D):
Panel:
Rear Chassis:
Weight (Approx.):
Transmitter
Output Power:
Modulation Type:
Maximum Deviation:
Spurious Radiation:
Modulation Distortion:
Microphone Impedance:
Receiver
Circuit Type:
Intermediate Frequency:

FTM-400DR Specifications

RX: 108 - 137 MHz, 137 - 174 MHz,
174 - 222 MHz, 222 - 420 MHz,
420 - 470 MHz, 800 - 999 MHz (Cellular Blocked)
TX: 144 - 148 MHz,
430 - 450 MHz
5/6.25/10/12.5/15/20/25/50/100 kHz
F1D, F2D, F3E, F7W
50 Ω, unbalanced
±2.5 ppm (−20 °C to +60 °C)
−20 °C to +60 °C
11 - 16 V DC (Negative Ground)
RX: 500 mA (Analog)
600 mA (Digital)
TX: 9.4 A (144 MHz / Analog)
9.5 A (144 MHz / Digital)
10.2 A (430 MHz / Analog)
10.3 A (430 MHz / Digital)
140(W) × 72(H) × 20(D) mm (w/o knob & connectors)
140(W) × 40(H) × 125(D) mm (w/o connectors)
1150g (Panel + Rear Chassis + Connection Cable)
50 W (144 / 430 MHz), 20 W (144 / 430MHz)
5 W (144 / 430 MHz)
Variable Reactance
±5 KHz,
better than −60 dB
less than 3%
2 kΩ
Double-conversion super heterodyne (N-FM / AM)
1st: A- Band 47.25 MHz (N-FM / AM)
1st: B- Band 44.85 MHz (N-FM / AM)
2nd: 450 kHz (N-FM / AM)
FCC ID: K6620345X40
IC: 511B-20345X40
79