Functions Used For Making Calls; Making Calls; Considerations - Siemens HiPath 1100 User Manual

Step by step

Functions used for making calls

Making Calls

Considerations

• When authorized, it allows you to call external num-
1
bers on a public network.
• The HiPath 1100 can also be programmed to require
pressing the "Internal" key before an internal number
can be dialed. When this occurs, there is no need to
enter an external line access code to dial an external
number ("Automatic seizure of an external line"
Check with your system's support technician.
• Ask your support technician for the required internal
numbers, public network access codes as well as
information about activated features and available
extensions.
• Depending on how the HiPath 1100 is programmed
(ask the system's technical support team) it will au-
tomatically select the most economical route for
making an external call (LCR - Least Cost Routing).
When an LCR is not available, the non-default carrier
name or "EXPENSIVE CONN" appears on the dis-
play, and a warning tone is emitted.
• On system telephones volume control is adjusted
individually on each set during calls.
[1] See the chapter Important Programming Data - Classes of Service
in Programming manual.
[2] It allows the user to dial an external call directly, without having to
dial an external access code (e.g 0). If a continuous dialing tone is
heard when the handset is lifted, it means that Automatic Seizure
Mode is activated (see Programming na External Line - Automatic
Seizure of an external line, in the programming manual).
Functions used for making calls
2
).
17