For Fax/Did - Siemens HiPath 1100 User Manual

Functions used when receiving calls
Step by step
SAVE?
FORWARD TO:
TO: FAX
TO: DID
TO: FAX/DID
TO: ANNOUNCEMENT
SAVE?
62
or
qeh
Enter the code for internal call forwarding.
p
Enter the number for the
1. Extension you want to call (e.g., 11/101).
2. UCD subscriber group for voice mail (e.g., 790).
3. Call group (e.g 770)
4. Access to an external line (e.g., 0) and the external
destination number.
Confirm.
If call forwarding is activated, the display will show
"FORWARD TO:" during a period of time.

For Fax/DID

When a Fax/DID module is installed, calls can be for-
warded to Auto-answering mode.
p
Enter the type of call forwarding wanted:
qee
1.
qeh
2.
3.p
Enter the call forwarding destination number.
khd
1.
Call forward to FAX is indicated on the display.
khe
2.
Call forward to DID is indicated on the display.
khf
3.
Call forward to DID/FAX is indicated on the display.
khg
4.
Call forward to Greeting is indicated on the display.
Confirm.
[1] For further information about the Fax/DID module, see Fax/DID
Auto-answering mode in the Programming manual.
1
- Direct call forwarding
- Call forward no answer
- FAX
- Attendant (direct dialing to extension)
- Fax/DID
- Message