Step by step
CFC ON
1
Conditional
This feature is available when using a CTI (Com-
puter Telephony Integration) interface.
Incoming calls can be forwarded to a specified destina-
tion list, as configured in a TAPI-type application such as
a Windows TAPI Browser. The settings of the previous
list or unconditional call forwarding will be replaced with
the new list settings.
The following information is required for configuring a
list:
•
Incoming caller ID
•
Day of the week and time
•
Type of call (internal or external)
When more than one number have been specified for
incoming calls to an extension, the call forwarding prior-
ity will be:
1. Checks to see if the Caller ID for the incoming call
matches the number programmed for the extension
2. Checks to ensure that the Type of Call (internal or ex-
ternal) has been configured
3. Checks the time settings.
Required: The extension has permission for conditional
call forwarding and the system is connected to a PC that
has a TSB application installed.
1. Rules and conditions for call forwarding can be con-
figured for each extension by using a Windows TSP
application
2. Apply the settings to the extension desired.
3. From this moment on the extension will be forward-
ed.
The display shows that this feature is activated.
[1] The system allows up to 50 call forwarding numbers (see Program-
ming manual,Programming an extension - Conditional forwarding
limited by extension and external CFW).
Conditional call forwarding has priority over an unconditional call
forwarding.
Conditional call forwarding is not available for S
Functions used when receiving calls
extensions.
0
63