Parking - Siemens HiPath 1100 User Manual

Functions used during calls
Step by step
*56=PARK CALL?
PARK
#56=RTRV CALL?
PARK
52

Parking

The parking feature can place up to 10 internal or exter-
nal calls on hold and answer these at any extension.
Required: A call must be in progress.
Press to access the Service menu.
Select and confirm.
or
qij
Enter the code for parking a call.
or
Press the "PARK" key.
d m
Select a parking slot
...
(e.g., 0).
t
or Replace the handset or press the SPEAKER key
Recovering a parked call
Press to access the Service menu.
Select and confirm.
or
Press to access the Service menu.
rij
Enter the code to retrieve the call.
or
Press the "PARK" key.
d m
Select a parking slot
...
(e.g., 0).
s
Start conversation.
[1] If the slot selected is busy, a rejection tone is heard.
If a call that was placed on parking is not recovered after a specified
timeout, it is sent back to the originating extension.
1