Adjusting The Tone (Tone Control) - Denon AVR-1910 Owner's Manual

Setting items
AFDM (Auto Flag Detect ON : Set.
Mode) OFF : Do not set.
Detects the source's surround
back channel signal and sets
the optimum surround mode
automatically.
Surround Back
n For 2-channel sources
Sets the method of
ON : The surround back channel is used.
generating of the surround OFF : No signal is played from the surround back channels.
back channel.
n For multi channel sources
Set this to set the method of generating of the surround back channel
for sources that do not include surround back signals and when you
do not want to play the surround back signals included in the source.
Check the audio signals of the source being played before making this
setting.
OFF : No signal is played from the surround back channels.
MTRX ON : Generate and play the surround back signals from the
surround channel signals.
PLgx CINEMA
decoding the signals in the "Dolby Pro Logic gx Cinema" mode.
PLgx MUSIC
decoding the signals in the "Dolby Pro Logic gx Music" mode.
ES MTRX : Generate and play the surround back signals from the
surround channel signals of the DTS source.
ES DSCRT
z
channel DTS source.
DSCRT ON
channel source.
z 1 : This can be selected when "S.Back" in the "Speaker Config."
settings (vpage 26) is set to "2sp".
z 2 : This can be selected when "S.Back" in the "Speaker Config."
settings (vpage 26) is set to "2sp" or "1sp".
z 3 : When "AFDM" is set to "ON", the surround back channel is played
with the AFDM function. When selected while "AFDM" is set to
"OFF", the source's surround back signals are played.
This can also be set by pressing
NOTE
This is valid when the "Amp Assign" setting (vpage 25) is set to "7 .1-
channel surround back" or "6.1-channel surround back", and when the
"S.Back" setting (vpage 26) is set to "Large" or "Small".
Remote control
operation buttons
Setting contents
1 : Generate and play the surround back signals by
z
2 : Generate and play the surround back signals by
z
3 : Play the surround back signals included in the 6.1-
z 3 : Play the surround back signals included in the 7 .1-
.
Displaying the menu
:
: Moves the cursor (Up/Down/Left/Right)
Cancel the menu
Setting items
Front Height ON : Use the front height channel.
OFF : Do not use the front height channel.
Set whether or not to use
the front height channel.
This can also be set by pressing
Subwoofer ATT ON : The input from the subwoofer channel is attenuated.
OFF : The input from the subwoofer channel is not attenuated. Usually use
Attenuate subwoofer level
when using EXT. IN mode. in this mode.
S et this to "ON" if the subwoofer channel level seems too high when
playing audio signal.
Subwoofer ON : The subwoofer is used.
Turn subwoofer output on OFF : The subwoofer is not used.
and off.
Default Yes : Reset to the defaults.
No : Do not reset to the defaults.
Restores all the surround
parameter settings to their
defaults.

Adjusting the tone (Tone Control)

Setting items
Tone Control
ON : Allow tone adjustment (treble, bass).
OFF : Playback without tone adjustment.
Sets the tone control function
ON and OFF.
The tone cannot be adjusted when in the DIRECT mode.
This can be set when
"Dynamic EQ" (vpage
46) is set to "OFF".
Bass
–6dB ~ +6dB (0dB)
Adjusts the low frequencies.
This can be set when
"Tone Control" is set to
"ON".
Treble –6dB ~ +6dB (0dB)
Adjusts the high
frequencies.
This can be set when
"Tone Control" is set to
"ON".
: Decision the setting
ENGLISH
Adjusting the Sound Field Effect (Parameter)
Setting contents
.
Default settings are underlined.
Setting contents
: Return to previous menu