Denon AVR-1910 Owner's Manual page 37

Changing the Input Sources Assigned to the Input Terminals
(Assign)
Setting items
Input Assign (HDMI)
The DVD
:
HDMI
Assign input sources to input
sources are assigned to the HDMI input terminals as shown below.
connectors.
• HDMI1 / HDMI2 / HDMI3 / HDMI4
• None : Do not assign an HDMI input terminal to the currently selected
input source.
b Upon purchase, the settings of the different input sources are as shown
below.
Input
source
Default
setting
• When HDMI is assigned to an input source, the audio signal switches
to HDMI along with the video signal. To use with the digital audio
input connectors assigned, set menu "Input Mode" (vpage 34) to
"Digital" .
• When the AVR-1910 and TV are connected with an HDMI cable, if the
TV is not compatible with HDMI audio signal playback, only the video
signals are output to the monitor.
• The audio signals input from the analog, digital and EXT. IN connectors
are not output to the TV.
NOTE
When "HDMI Control" is set to "ON" , HDMI cannot be assigned to "TV"
at the "HDMI" settings (vpage 28).
Input Assign (Digital)
Digital : The DVD
Assign input sources to input
input sources are assigned to the digital audio input terminals as shown
connectors.
below.
• C1 (COAX1) / C2 (COAX2) / O1 (OPT1) / O2 (OPT2)
None ： Do not assign a digital input terminal to the currently selected
•
input source.
b Upon purchase, the settings of the different input sources are as shown
below.
Input source
Default setting
Input source
Default setting
Remote control
operation buttons
Default settings are underlined.
Setting contents
HDP TV SAT/CBL VCR DVR
DVD HDP TV SAT/CBL VCR DVR
HDMI1 HDMI2 None HDMI3 None HDMI4
HDP TV SAT/CBL VCR DVR V.AUX
DVD HDP TV SAT/CBL
COAX1 OPT1 COAX2
None
DVR V.AUX CD
OPT2 None None
Displaying the menu
:
: Moves the cursor (Up/Down/Left/Right)
Cancel the menu
Setting items
Input Assign (Component)
Assign input sources to input
connectors.
V.AUX input
V.AUX
iPod Dock
None
Change the input source to
which the control dock for
iPod is assigned.
CD
VCR
None
Making the input settings (Input Setup)
Setting contents
Component : The DVD HDP TV SAT/CBL
input sources are assigned to the component video input terminals as
shown below.
C OMP1 (Component video 1 input terminal) / COMP2 (Component
●
video 2 input terminal)
N one : Do not assign the component video input terminals to the currently
●
selected input source.
b Upon purchase, the settings of the different input sources are as shown
below.
Input
DVD HDP TV SAT/CBL
source
Default
COMP1 None None None
setting
The control dock for iPod can be assigned to the DVD
DVR V.AUX CD
input sources.
:
Assign Assign the currently selected input source to the Control Dock for
iPod input.
:
None Do not assign the currently selected input source to the Control Dock
for iPod input.
• With the default settings, the control dock for iPod can be used
connected to the VCR (iPod) connector.
• Even if "iPod Dock" is set to "Assign" , if AVR-1910 and control dock
for iPod are not connected, the input is used as the normal input
source.
: Decision the setting : Return to previous menu
ENGLISH
VCR DVR V.AUX
VCR DVR V.AUX
None COMP2 None
SAT/CBL VCR