Adjusting The Tone (Tone Control) - Denon AVR-1610 Owner's Manual

ENGLISH
Setting items
AFDM (Auto Flag Detect ON : Set.
Mode) OFF : Do not set.
Detects the source's surround
back channel signal and sets
the optimum surround mode
automatically.
Surround Back
n For 2-channel sources
Sets the method of
ON : The surround back channel is used.
generating of the surround OFF : No signal is played from the surround back channels.
back channel.
n For multi channel sources
Set this to set the method of generating of the surround back channel
for sources that do not include surround back signals and when you
do not want to play the surround back signals included in the source.
Check the audio signals of the source being played before making this
setting.
OFF : No signal is played from the surround back channels.
MTRX ON : Generate and play the surround back signals from the
surround channel signals.
PLgx CINEMA
decoding the signals in the "Dolby Pro Logic gx Cinema" mode.
PLgx MUSIC
decoding the signals in the "Dolby Pro Logic gx Music" mode.
ES MTRX : Generate and play the surround back signals from the
surround channel signals of the DTS source.
ES DSCRT
channel DTS source.
DSCRT ON
channel source.
z 1 : This can be selected when "S.Back" in the "Speaker Config."
z 2 : This can be selected when "S.Back" in the "Speaker Config."
z 3 : When "AFDM" is set to "ON", the surround back channel is played
This can also be set by pressing
NOTE
This is valid when the "Pre Assign" setting (vpage 24) is set to "7 .1-
channel surround back" or "6.1-channel surround back", and when the
"S.Back" setting (vpage 25) is set to "Large" or "Small".
Remote control
42
operation buttons
Setting contents
1 : Generate and play the surround back signals by
z
2 : Generate and play the surround back signals by
z
3 : Play the surround back signals included in the 6.1-
z
z 3 : Play the surround back signals included in the 7 .1-
settings (vpage 25) is set to "2ch".
settings (vpage 25) is set to "2ch" or "1ch".
with the AFDM function. When selected while "AFDM" is set to
"OFF", the source's surround back signals are played.
.
Displaying the menu
:
Cancel the menu
Setting items
Front Height
Set whether or not to use
the front height channel.
Subwoofer
Turn subwoofer output on
and off.
Default
Restores all the surround
parameter settings to their
defaults.

Adjusting the tone (Tone Control)

Setting items
Tone Control
Sets the tone control function
ON and OFF.
This can be set when
"Dynamic EQ" (vpage
43) is set to "OFF".
Bass
Adjusts the low frequencies.
This can be set when
"Tone Control" is set to
"ON".
Treble
Adjusts the
frequencies.
This can be set when
"Tone Control" is set to
"ON".
: Moves the cursor (Up/Down/Left/Right)
Adjusting the Sound Field Effect (Parameter)
Setting contents
ON : Use the front height channel.
OFF : Do not use the front height channel.
This can also be set by pressing .
ON : The subwoofer is used.
OFF : The subwoofer is not used.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
Default settings are underlined.
Setting contents
ON : Allow tone adjustment (treble, bass).
OFF : Playback without tone adjustment.
The tone cannot be adjusted when in the DIRECT mode.
–6dB ~ +6dB (0dB)
–6dB ~ +6dB (0dB)
high
: Return to previous menu
: Decision the setting