Denon AVR-1909 Owner's Manual
  1. Manuals
  2. Brands
  3. Denon Manuals
  4. Stereo Receiver
  5. AVR-1909
  6. Owner's manual

Denon AVR-1909 Owner's Manual

Hide thumbs Also See for AVR-1909:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
DENON
AV SURROUND RECEIVER
AVR-1909
Owner's Manual
Manuel de l'Utilisateur

Advertisement

Table of Contents
loading

Related Manuals for Denon AVR-1909

Summary of Contents for Denon AVR-1909

  • Page 1 DENON AV SURROUND RECEIVER AVR-1909 Owner's Manual Manuel de l'Utilisateur...

  • Page 2: Accessories

    ENGLISH FRANCAIS SAFETY INSTRUCTIONS SAFETY PRECAUTIONS 13. Power-Cord Protection - Power-supply cords should be routed so that they Read Instructions - All the safety and operating instructions should be read before the product is operated. are not likely to be walked on or pinched by items placed upon or against Retain Instructions - The safety and operating instructions should be them, paying particular attention to cords at plugs, convenience receptacles, retained for future reference.
  • Page 3 2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product. NOTE This product has been tested and found to comply with the limits for a Class B digital device.

  • Page 4: Table Of Contents

    ENGLISH Contents ·35 Option Setup·· Menu Operations Amp Assign ·35 Volume Control·· .. ···35 Operations·· .. ··· ·.. ··..·····22 Getting Started Source Delete ..·.. ·36 Example of Display of Default Values·· ..·· .. · ·..22 On-Screen Display ·36 Examples of On-screen Display and Front Display ·..

  • Page 5: Getting Started

    Operating DENON Audio Components ..·65 ZONE2 ·52 Presetting · .. · Thank you for purchasing this DENON product. To ensure proper ·65 Audio Input Signal·········· Operating Preset Components .. ·65 operation, please read this owner's manual carefully before using the HOMI Information··...

  • Page 6: Cautions On Handling

    • Before turning the power switch on In addition to the AVR-1909, the included main remote control unit • The supplied batteries are only for verifying operation. (RC-l099) can also be used to operate the equipment listed below.

  • Page 7: Part Names And Functions· . ·4

    ENGLISH ~Cursor buttons (ll. \7) ·····122} DYNAMIC VOLUME button (50) Part Names and Functions About Dynamic Volume MASTER VOLUME control knob ..(54) Audyssey Dynamic Volume™ solves the problem AUDYSSEY DYNAMIC VOLUME For buttons not explained here, see the page indicated in parentheses ( ). of large variations in volume level between indicator..

  • Page 8: Display

    ENGLISH Display iiiii:::::i=~=1 =::..=====.::::::::::: .. : ::::::::::::: ::::::::::I·-I-·~ NIGHT indicator Input signal indicators This lights when the night mode is selected. 81nput signal channel indicators These light when digital signals are input. RESTORER indicator This lights when the RESTORER mode is •...

  • Page 9: Rear Panel

    ENGLISH Rear Panel, ~ ~ ~ ; ; j l , - ~ ~ - ~ - 3 ~ v - ' : A - ~ ' - ; ' - . I - ~ - : = - O - N ' T - O A - ~ - 4 + ~ - : - : : - : - : r l - t g - ~ - . : - . : ~ - . 4 _ 1 ~ _ _ ~ _ ~ _ ~ _ ] ~ I ~ _ - , - S : - : ~ - ~ : - : s - ----~-~...

  • Page 10: Remote Control Unit

    SAT TUl button. *2: To select "XM" as the input source, use SATTU2 button. Volume control buttons (VOLUME) (68) Muting button (MUTE) (68) DENON SHIFT button (68) FAVORITES DIRECT PLAY button (68) .~[.u. PHONO buttons cannot be used . • N.Ji.

  • Page 11: Connections

    Please select the types of connections suited for the equipment you are connecting. With some types of connections, certain settings must be made on the AVR-1909. For details, refer to the instructions for the Cables Used for Connections respective connection items below.

  • Page 12: Video Conversion Function

    Digital video signals: HOMI • When only HOMI or component video signals are input to the AVR-1909, the characters of the on-screen Analog video signals: Component video, S-Video and Video display are not displayed over the picture.

  • Page 13: Speaker Connections

    For surround back speakers: 2-channels • Since" Amp Assign" of AVR-1909 is set to "ZONE2" by default, audio is not output from the surround back speakers. When using the surround back speakers with MAIN ZONE, change the "Amp Assign" setting to "7.1ch" (Gr'page 35).
  • Page 14 Even if there are no problems with the surrounding ventilation and connections, in the event of the protection circuit becoming acti- Turn the speaker terminal clockwise to vated, due to thinking that the AVR-1909 has failed, please contact tighten it. DENON Service center after switching off.

  • Page 15: Connecting Equipment With Hdmi Connectors

    DolbyTrueHD, Bitstream Blu-ray The AVR-1909 is HDCP-eompatible. For details on the Blu-ray Disc player / DVD player or monitor you are DTS-HD using, refer to its operating instructions. By default, the HDMI audio signals are output from the speakers connected to the AVR-1909.

  • Page 16: Connecting The Monitor

    ENGLISH Connecting the Monitor Connecting the Playback Components • Select the terminal to use and connect the device (Gf'page 9 "Video Conversion Function"). Carefully check the left and right (R) channels and the inputs and outputs, and be sure to interconnect correctly.

  • Page 17: Cd Player

    Use a DENON control dock for iPod (ASD-l R, ASD-3N or ASD-3W sold CD player separately) to connect the iPod to the AVR-1909. For instructions on - - A U D I O - - the control dock for iPod settings, refer to the control dock for iPod's...

  • Page 18: Tv/Cable Tuner

    When using a coaxial cable for the digital audio connection, make the settings at menu "Input Setup" - "Assign" - "Digitalin" (lJ::§'page 42). • When recording via the AVR-1909, the playback device's cable must be of the same type as the cable used to connect the AVR-1909's VCR OUT connector.

  • Page 19: Cd Recorder Md Recorder Tape Deck

    ENGLISH CD Recorder MD Recorder Tape Deck Connections to Other Devices Make analog connections if you wish to record analog audio signals, or digital connections if you wish to Carefully check the left and right (R) channels and the inputs and outputs, and be sure to interconnect record digital audio signals, depending on the types of connectors on the components being used.

  • Page 20: Xm Connector

    ... n ..e_n..t_w.;..it ..h _M ..u ..l t ..i ..-c ..h ""' 8 ""' n _n . .. e ... I ... O ..u _t.:.p..u_t..c..o..n..n..e_ct . .. o _rs_'...... XM connector • The AVR-1909 is an XM Ready® receiver, You can receive XM® Satellite Radio by connecting to the Blu-ray Disc player / DVD player /...

  • Page 21: Sirius Connector

    • The AVR-1909 is a SIRIUS Satellite Radio Ready® receiver. You can receive SIRIUS® Satellite Radio by connecting to the SiriusConnect Home Tuner and subscribing to the SIRIUS service.

  • Page 22: Antenna Terminals

    ENGLISH Antenna terminals An F-type FM antenna cable plug can be connected directly. Direction of broadcasting station AM loop antenna FM antenna [<cooli,d) Jl750/0hms rr;l Coaxial cable ~~~w..a1;.~~-.-' FM indoor antenna (supplied) Connection of AM antennas 1. Push the 2. Insert the 3.

  • Page 23: Multi-Zone

    (Connect devices corresponding with room to The AVR-1909's status information as well as iPod can be browsed watching the RF Remote Controller's room function to this jack.) display. For details, refer to the operating instructions of the respective devices.

  • Page 24: Connecting The Power Cord

    ENGLISH Connecting the Power Cord Wait until all connections have been completed before connecting the power cord. U.;-------~I:J Power cord To household power outlet (AC 120 V, 60 Hz) Connection the AC outlets ll~· • These outlets supply power to external audio equipment.

  • Page 25: Menu Operations

    ENGLISH Menu Operations & With the AVR-1909, settings and operations for most functions can be Example of Display of Default performed by operating white looking at the menus displayed on the Symbols used to indicate buttons in this manual monitor screen.

  • Page 26: Examples Of On-Screen Display And Front Display

    ENGLISH Examples of On-screen Display and Front Display Some typical examples are described below. [Front display] [On-screen display] Screen title Set u p) .Manual Setup 3. Input Setup Submenu title 4. Parameter 5. Information f'1enu Press to execute <] Currently selected line 3-1.Assign Current setting i:3n...

  • Page 27: Auto Setup

    ENGLISH Menu Map Auto Setup (trpage 25 - 29) ..J ..::::I Start Menu ::::I Parameter Check [flo Auto Setup • • • • • • • • • • Step ,: Speaker Detection •...

  • Page 28: Preparations

    ENGLISH Auto Setup & • Audyssey MultEO® automatically measures the acoustical problems Preparations Symbols used to indicate buttons in this manual in the listening environment to create the best audio experience for your home theater. Button located on both the main unit and the remote control Connect the included calibrated setup microphone to •...

  • Page 29: Auto Setup

    ( Step 4: Check ...;...---------~ that the speakers are not connected properly. Turn the AVR-1909 If an error message appears during the measurements, check" Error off, check the speaker connections and repeat the measurement Messages", take the advised action, then start the measurements...
  • Page 30 ENGLISH C'-S_t_e.:..p_2_:_M_e_as_u_r_e_rn_e_n_t (Step 3 : Calculation (Step 4 : Check • Menu screen • • Menu screen • • Menu screen • [J'Speaker Config. Check Distance Check ..[J'Next4 [J'Calculate4 Channel Level Check Calculate4 Ret r y 4 Crossover FreQ. Check _---------._ Cancel4 Cancel4...

  • Page 31: Error Messages

    • The front L speaker was Cancel~ detected. The auto setup measurement results are stored in the AVR-1909. <3. Press 6. to select" Store ..then press • "Storing Please wait··· .. is displayed on the on-screen display • Too much noise in the room for accurate •...

  • Page 32: Fj Parameter Check

    ENGLISH Parameter Check Manual Setup Check auto setup measurement results. This is displayed after the auto setup procedure is completed. & [Selectable items] Make detail settings for various parameters. Symbols used indicate buttons in this manual Speaker Contig. Check Distance Check Button located on both the main unit and the remote control Speaker Setup Channel LavelCheck...

  • Page 33: Subwoofer Setup

    "Large". [Selectable items] - When using just one surround back speaker, connect it to the left Since "Amp Assign" of AVR-1909 is set to "ZONE2" by default, "I channel (SBU audio is not output from the surround back speakers. When using the o.1ft :...

  • Page 34: Lei Channel Level

    ENGLISH • Channel Level Crossover Frequency Front Speaker Setup Adjust channel levels to.obtain equal volume from all speakers. Select crossover frequency from which subwoofer handles low Select front speakers to use for each surround mode. range signal. [Selectable items] Test Tone [Selectable items] Nonnal To change the settings, select "Custom".

  • Page 35: Hdmi Setup

    ENGLISH HDMI Setup Power Control flRGB Range Make settings for RGB output range. Interlock power OFF with HOMI control. Make settings for HOMI video/audio output [Selectable items] • Menu screen • [Selectable items] Nonnal Use video range from 16 (black) to 235 (white) Set up 2.

  • Page 36: Audio Setup . ·33

    ENGLISH Front Audio Setup Dolby Digital Setup Select front speaker size. Set dynamic range for downmix playback of Dolby Digital Make settings for audio playback sources. [Selectable items] • Menu screen • [Selectable items] Large I Small : Select front speaker size. 2.

  • Page 37: Zone2 Setup

    ENGLISH Manual EO lJea Preset ZONE2 Setup Adjust tonal quality for each speaker using graphic equalizer. Set MultEO related settings and Manual EO beforehand. Make settings for audio playback In a ZONE2 system Default Resets the settings to the default values. •...

  • Page 38: Volume Limit

    ENGLISH Option Setup Volume Limit Volume Control Make a setting for maximum volume. Set the MAIN ZONE volume setting. Make vanous other settings [Selectable items] • Menu screen • Volume Limit Do not set a maximum volume. 2.Manual Setup Make a setting for maximum volume. -2OdB Set the maximum volume to -20 dB.

  • Page 39: Source Delete

    Show display for 10 seconds after operation. -n·n. . Turn display off. On-Screen Display When using the AVR-1909 with only the included remote control iPod Information unit (RC-1099). use Remote ID "1" (default). Make on-screen display related settings. When using a separately sold remote control unit IRC-7000CI. etcl This sets the time the on-screen display is displayed when an iPod this function can be used.

  • Page 40: Display

    ENGLISH Display Setup Lock Adjust display brightness of the receiver. Protect settings from inadvertent change. [Selectable items] [Selectable items] Bright Normal display brightness. Turn protection on. .Turn protection off. Reduced display brightness Dark Very low display brightness. Display is off unless controls are operated. -When "Setup Lock"...

  • Page 41: Input Setup

    ENGLISH Input Setup Use this procedure to select the input source and make the settings CD, CDR/TAPE, DVD, HOP, TV/CBL, VCR, V.AUX • Synlbols used to indicate buttons in this manual related to playing input sources. This menu is for "CD", "CDR/TAPE", "DVD", "HOP", "TV/CBL", Button located on both the main unit and the remote control "...

  • Page 42: Settings Related To Playing Input Sources

    ENGLISH -N·"· Settings Related to Playing Input Preset Name - It is not possible to select HDMI input signals. Assign name to a preset memory. Sources - When playing HDMI video input signals, the analog video signal of Names containing up to 8 characters can be input. another input source cannot be selected for the HDMI video output.
  • Page 43 ENGLISH Progressive Mode i/p Scaler Select optimum progressive mode for video material. Make settings for i1p scaler function. I OVO II HOP II TV/CBL II VCR II V.AUX I I OVO II HOP II TV/CBL II VCR II V.AUX I [Input source] [Input source] [Selectable items]...
  • Page 44 ENGLISH • IIRename· • When a digital signal is properly input, the "1Qi[]" indicator lights on dis~narnef()(.thi~¥>urce. Change the "1Qi[]" the display. If the indicator does not light, check the digital Names90l1~t~~up';'!~8~~rs~n be input. input connector assignment and the connections. •...

  • Page 45: Assign

    VCR (iPod) connector. None No digital input connector assigned. • Even if "iPod dock" is set to "Assign", if AVR-1909 and control dock None : No HDMI input connector assigned. for iPod are not connected, the input is used as the normal input...

  • Page 46: Parental Lock

    DSIRIUS Antenna Aiming Edit Lock Code Change the password. Make settings for shuffle mode. ='" Signal strength is excellent iiiiiiliiiiiiii DWhen DENON control dock for iPod ASD-1R is connected ENTER. Press Signal strength is good s;;§! <II>, ENTER. Input old password (4 digits) using f:J.

  • Page 47: Surround Modes

    ENGLISH Surround Modes Select the mode to suit the source Standard Playback • Symbols used to indicate buttons in this manual Select the "Cinema", "Music", "Game" and "Pro Logic" modes at This the mooe for enjoying surround sound according to the Button located on both the main unit and the remote control menu "Parameter"...

  • Page 48: Playing Multi-Ehannel Sources (Dolby Digital. Dts. Etc.)

    Direct Playback (Dolby Digital, DTS, etc.) The desired mode according to the program source and viewing situation can be selected from among 7 DENON original surround Selecting the mode In the case of standard playback of multi channel sources, the AVR- modes.

  • Page 49: Playback In The Pure Direct Mode

    ENGLISH Operating from the main unit Parameter <SELECT/ENTER> to select the surround mode. ODuring PCM (2ch) I Analog I DOLBY DIGITAL (2ch) DIRECT STEREO DOLBY PRO LOGIC!=JX (DOLBY PRO LOGIC • Symbols used indicate buttons in manual Adjusting the parameters this 7CH STEREO neural...

  • Page 50: Surround Parameter

    ENGLISH • Menu screen • Cinema EO Surround Parameter 4. Parameter Soften the treble range of movie soundtracks for better understanding. Adjust surround sound parameters ITl. Surround Parameter [Selectable items] 2. Tone The parameters (items) which can be adjusted differ Audyssey Settings 4.
  • Page 51 ENGLISH 1& Center Image Room Size S8 CH Out (for Multi-channel sources) Assign center channel signal to front left and right channels for wider Determine size of acoustic environment. Select playback mode for surround back channels. sound. [Selectable items] [Selectable items] 0.0 - 10.31 - [Variable range] Small...

  • Page 52: Tone

    ENGLISH SB CH Out (for 2-channel sources) Tone Audyssey Settings Determine whether to use surround back speakers. Adjust the tonal quality of the sound. Select room equalizer for current environment. [Selectable items] Tone Control MultEQ The surround back channel signal is played. Turn tone adjustments off.
  • Page 53 ENGLISH Dynamic EO Dynamic Volume Setting (Dynamic Volume Setting) Audyssey Dynamic EO solves the problem of deteriorating sound Audyssey Dynamic Volume solves the problem of large variations in Can be set when" Dynamic Volume" is set to "ON" quality as volume is decreased by taking into account human perception volume level between television programs, commercials, and between Set Dynamic Volume effect.

  • Page 54: Restorer

    ENGLISH Night Mode Audio Delay RESTORER This function restores compressed audio signals to how they Optimized setting for late-night listening. Compensate for mismatched timing between video and audio. were before compression and corrects the sense of volume of Set the dynamic range compression of the output audio. Delay audio.

  • Page 55: Status

    ENGLISH Information Audio Input Signal • Symbols used to indicate buttons in this manual <STATUS>. Information can be called out directly by pressing Shows Information about audiO Input signals Button located on both the main unit and the remote control BUTTON unit •...

  • Page 56: Homi Information

    ENGLISH HDMllnformation Auto Surround Mode Preset Station Shows ,nformat,on about HDMI Input Signals and monitor Shows ,nformat,on about auto surround mode settings Shows Information about preset stations The surround mode for which the last memory function was used • Menu screen • •...

  • Page 57: Preparations

    ENGLISH Pia back Operations During Playback Preparations • Symbols used to indicate buttons in this manual Button located on both the main unit and the remote control Adjusting the Master Volume BUTTON unit Turning the Power On <BUTTON> Button only on the main unit <MASTER VOLUME>...

  • Page 58: Playing Video And Audio E Q U I P M E N

    ENGLISH Playing Video and Audio Tune in the desired broadcast station. • Symbols used indicate buttons in this manual Equipment Button located on both the main unit and the remote control Q)To tune in automatically (Auto Tuning) BurrON unit [MODE] Press to light the "AUTO"...

  • Page 59: Listening To Preset Stations

    ENGLISH XM Ready® Subscription Listening to Preset Stations Checking the XM Signal Strength and Once you have installed the XM Mini-Tuner Home Dock, inserted the Radio 10 SHIFT Press to select the memory block (A to G). XM Mini-Tuner, connected the XM Mini-Tuner Home Dock to your XM Ready®...

  • Page 60: Presetting Radio Stations (Preset Memory)

    ENGLISH Presetting Radio Stations Searching Categories • Symbols used to indicate buttons in this manual (Preset Memory) t>. Button located on both the main unit and the remote control <l Press BUTTON Your favorite broadcast stations can be preset so that you can unit •...

  • Page 61: Basic Operation

    ENGLISH Presetting Radio Stations Basic Operation Checking the SIRIUS Signal Strength (Preset Memory) and Radio 10 <SOURCE SELECT> [SAT TU1/2] Either turn or press Your favorite broadcast stations can be preset so that you can to select "SIRIUS". <SOURCE SELECT> [SAT TU1/2] Either turn or press...

  • Page 62: Searching Categories

    (~page 85). Make the necessary preparations. <Jt> <ON/STANDBY> ENTER, (DSet the iPod in the DENON control dock for iPod. (~See the control dock for iPod's operating instructions.) Parental Lock (1)Assign the control dock for iPod's input. [OFF] [Front] TIme to the channel you want to lock.

  • Page 63: Listening To Music

    • When DENON control dock for iPod ASD-3N/3W is connected • Depending on the type of iPod and the software version, somefunctions may not operate. [Selectable items] • DENON will accept no responsibility whatsoever for any loss of iPod data.

  • Page 64: Other Operations And Functions

    ENGLISH Other Operations and Functions & "#:" Other Operations Symbols used to indicate buttons in this manual <ZONE2/REC SElECT>, <SOURCE • To cancel, press then turn Button located on both the main unit and the remote control SElECT> until "ZONE2 Source" is displayed. BUTTON unit •...

  • Page 65: Convenient Functions

    (Check the operating instructions of each device for details.) • AVR-1909 power off can be linked to the TV power off step. When you set "Output audio from amp" in the TV audio output setup operation, you can switch the amp power on.

  • Page 66: Channel Level

    [Front] When the input source is "iPod': you cannot perform channel level setting. If the AVR-1909 does not work please check the following. • Is the menu "Manual Setup" - "HOMI Setup" - "HOMI Control" ((Fpage 32) set to "ON"? •...

  • Page 67: Quick Select Function

    ENGLISH Quick Select Function Last Function Memory With this function, the currently playing input source, input mode, This stores the settings as they were directly before the standby surround mode, MultEQ settings and volume can be stored in the mode was set. memory.

  • Page 68: Remote Control Unit Operations

    [SOURCE CONTROL 1] [Rear] to "AUDIO" or ''VIDEO''. • DENON and other makes of components can be operated by setting the preset memory. Set to the AUDIO side for the CD position, and to the VIDEO side • Operation is not possible for some models.
  • Page 69 ENGLISH Functions of Buttons Component Front Device Blu-ray Video Disc Satellite CD Player iPod Tuner Video Deck Cable TV DVD Player: 0' PlaVI operated a er Plaver (VDP) Receiver (Monitor) SOURCE AUDIO VIDEO CONTROL 1 [OFF] [ON/SOURCE] iPod/ SOURCE TUNER DVD/HDP SAT /CABLE CONTROL 2...

  • Page 70: Punch Through Function

    RETURN Return Return Return Return Return Defauh DENON DENON HITACHI HITACHI *2 DENON setting (007) (1111 /121) (1081 /134) /1111 (Preset code) Special CD.CV CD.® CD.® Remarks [Special Remarks! Only one device can be set in the preset memory for each mode. When a new preset code is registered. the existing code is automatically erased.

  • Page 71: Punch Through Function

    ....and on CD, iPod/NETWORK. TUNER. The sub remote control unit IRC·l1 07) Included With the AVR-1909 DVD/HDP or VCR components when in the SAT/CABLE or TV can be used as the exclUSive multi-zone remote control unit mode. By default. nothing is set.

  • Page 72: Amp Assign Multi-Zone Connections And Operations

    (11[> <)1)) The amp assign function lets you assign the amplifiers for the different channels built into the AVR-1909 to the speaker outputs for the different zones. Select the desired playback environment from among "Setting 1" to "Setting 3", then set the corresponding "Amp Assign"...
  • Page 73 ENGLISH Setting 2: Setting 3 : .7.1-channel playback .Making bi-amp connections for the FL and FR channels in the MAIN ZONE and conducting 5.1-channel playback MAIN ZONE ----, (switching with other modes not possible) MAIN ZONE ----, Amp Assign mode: 7.1ch ---.

  • Page 74: Multi-Zone Settings And Operations With Zone Output

    Prepare pre-main amplifiers for ZONE2. Connectors for audio output Audio signals Stereo ZONE2 OUT MAIN ZONE (7.1-channel system) ZONE2 Monitor Pre-main amplifier ~~o©1 Blu-ray Disc player AVR-1909 DVD player ~lo~l© ..•.. o· o· "..,..ZONE2 Input audio output ",' Remote...

  • Page 75: Multi-Zone Operations

    ENGLISH Multi-zone Operations Adjusting the Volume • Symbols used to indicate buttons in this manual Button located on both the main unit and the remote control [Operation on the main unit] BUTTON unit • <ZONE2/REC SELECT> Press and select the zone to be adjusted Turning the Power On and Off <BUTTON>...

  • Page 76: Other Information

    ENGLISH Other Information Number of surround back speakers Setting for primarily watching movies using diffusion type About Speaker Installation speakers for the surround speakers We recommend using 2 speakers. For the greatest sense of surround sound envelopment. diffuse When using dipolar speakers in particular. be sure to use 2 speakers. radiation speakers such as bipolar types.
  • Page 77 It is fully The AVR-1909 is equipped with a digital signal processing circuit that The surround channel signals are converted into stereo and full band compatible with conventional products, including conventional DTS...
  • Page 78 ENGLISH DTS 96/24 HDMI Audyssey DTS 96/24 is a digital audio format enabling high sound quality (High-Definition Multimedia Inte. " playback in 5.1-channels with a sampling frequency of 96 kHz and 24 Audyssey MultEO® bit quantization on DVD-Video. HDMI is a digital interface standard for next generation TVs based Audyssey MultEO is a room equalization solution that calibrates any on DVI (Digital Visual Interface) standards and optimized for use in audio system so that it can achieve optimum performance for every...

  • Page 79: Surround Modes And Parameters

    ENGLISH Surround Modes and Parameters Signals and adjustability in the different modes Channel output Parameter (default values are shown in parentheses) Surround mode Surround Surround D. Camp AFDM Front UR Center Subwoofer SS CH Out Cinema EO. Mode Room Size Effect Delay time Subwoofer...
  • Page 80 ENGLISH Signals and adjustability in the different modes Parameter (default values are shown in parentheses) NEO:6 MUSIC Surround mode Dynamic PRO LOGIC II/!Ix MUSIC mode only EXT. IN only Night Mode Dynamic EO Tone mode only Volume RESTORER MultEO (NOTE51 (NOTE5) (NOTE61 (NOTE71...
  • Page 81 ENGLISH Differences in Surround Mode Names Depending on the Input Signals Input signals Button DOLBY DOLBY DIGITAL DTS-HD DOLBY DOLBY DTS-HD Note DOLBY DOLBY DOLBY DOLBY Linear Linear DTS-HD DTS ES DTS ES DIGITAL EX ANALOG High DOLBY DIGITAL Surround mode DIGITAL DIGITAL DIGITAL...
  • Page 82 ENGLISH Input signals Button DOLBY DOLBY DIGITAL DTS-HD DTS-HD DOLBY DOLBY Note DOLBY DOLBY DOLBY DOLBY Linear DTS-HD DTS ES DTS ES Linear" DIGITAL DIGITAL ANALOG High DOLBY Surround mode DIGITAL DIGITAL DIGITAL MTRX DIGITAL Master DSCRT (5.1ch) 96/24 TrueHD EX (With EXIWith Resolution...

  • Page 83: Relationship Between Video Signals And Monitor Output

    ENGLISH Relationship Between Video Signals and Monitor Output Input signals Monitor output Video convert COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO HOM' VIDEO VIDEO VIDEO VIDEO S-VIDEO S-VIDEO S-VIDEO S-VIDEO S-VIDEO S-VIDEO S-VIDEO S-VIDEO 1'080p) COMPONENT (480p - 720p) COMPONENT COMPONENT (480i /576i) COMPONENT...
  • Page 84 ENGLISH Inout sianals Monitor Dutout S-VIOEO Video convert MONITOR OUT VIDEO HOMI COMPONENT S-VIOEO VIDEO HOMI COMPONENT S-VIDEO VIDEO S-VIDEO S-VIDEO VIDEO*2 Used Not used VIDEO COMPONENT COMPONENT*l VIDEO COMPONENT*2 S-VIDEO COMPONENT*2 VIDEO*2 Used S-VIDEO Not used COMPONENT* 1 VIDEO HDMI HDMI VIDEO...

  • Page 85: Troubleshooting

    • Disconnect the headphones. • Headphones are connected. Even applying • The AVR-1909 amplifier circuit • Switch off the power and please • No digital signals are being • Select an input source for which power, the power has failed.
  • Page 86 ENGLISH [Remote Control Unit] Symptom Calise Countenneasure Page Syn1ptom Cause Countenneasure Page No sound is • Subwoofer's power not turned • Turn on the subwoofer's power. produced from Set does not work • Batteries are worn. • Replace with new batteries. subwoofer.
  • Page 87 • Check the connections. 12 - 16 HDMI audio '" • The "Manual Setup" - "HDMI • Set to "Amp" appears. AVR-1909 and monitor are faulty. signals are not Setup " "HDMI Audio Out" • The monitor's input setting is •...
  • Page 88 "Parental Lock" is to the AVR-1909. on (locked). "CHECK • AVR-1909's XM connector and • Check that the connections are "ACQUIRING • The selected channel is not • Select another channel. correct. ANTENNA" is the XM Mini-Tuner and Home SIGNAL"...

  • Page 89: Main Remote Control (Rc-1 099)

    ENGLISH Specifications Tuner section Audio section [FM) [AM] (note: at 75 OIohms, dBf = 1 x 10·'5 W) • Power amplifier Rated output: Front (A, B): Receiving Range: 875 MHz - 107.9 MHz 520 kHz - 1710 kHz Usable Sensitivity: (11.2 dBfI 90 W + 90 W (8 OIohms.
  • Page 90 Daytron 003,049 Cy\Jeme~ Aiwa 004, 005, 006, 018, 026, 029, 087,092 025, 055, 059, 074, 089, 093, Dimensia 045, 061, 062, 085 Denon 014, (111)*, Daewoo 013, 017, 020, 041, 059, 089, 095, 096 Toshiba Nikko Dixi 007, 015, 027...

  • Page 91: Satellite Receiver

    011. 012, 013, 026, 093, 099, Sharp 100,104,121 Burrnster Regency Siemens 003,035 Carvery Samsung 014,023 045,144 Signature [111]*,044 Denon Scientific Atlanta 004. 024. 025 Simpson Emerson 004,005,006,007 Signal 043,046,138,146,150 Sony Fisher 003. 008. 009. 010 SL Marx Soundesign 030. 050. 062...
  • Page 92 •...
  • Page 94 DENON www.denon.com D&M Holdings Inc. Denon Brand Company, 5411 10048004D Printed China...

  • Page 95: Getting Started

    DENON Getting Started Mise en route AVR-19091 AVR-789 lovo Player Lecteur DVD Speakers Haut-parleurs AN Receiver R6cept 10-01 Cable/Satellite Cable' Satellite • Cables are NOT included. NOTES: For more connection options ,. REMARQUE : Autres connexions. • Les cables NE sont PAS compris.
  • Page 96 Check & choose your VIDEO connection. Verifiez et choisissez votre connexion VIDEO. Check Verifiez Check OVO Player Lecteur OVO Verifiez Cable I Satellite Cable/Satellite • HOMI All analog video signals can be converted to HOM I output. Tous les signaux analogiques Component peuvent etre convertis it la sortie HOM!.

  • Page 97: Dvd Player

    DVD Player Lecteur OVO _1----_1 Digital Video and Audio Analog Video Digital Audio * All analog video signals can be converted to HDMI output. * Audio connections are required with analog video connections . • Tous les signaux analogiques peuvent etre convertis it la sortie HOM!.
  • Page 98 • FR: Front Right Speaker Enceintes avant droit C : Center Speaker Enceinte centrale SL: Surround Left Speaker Enceintes surround gauche .SR:Surround Right Speaker Enceintes surround droit • SW:Subwoofer Subwoofer Need more information? Avez-vous besoin d'autres informations? www.denon.com 5421 10005 0000 Denon Brand Company...
  • Page 99 Tel: +73272 718304 Fax: +73272 581945718438 Om det inte finns nagon auktoriserad Denon-verkstad dar du bar, kontakta en av vara internationella servicecentra (se ovan) Korea D&M Sales and Marketing Korea Ltd. Chung Jin BID., 1OF, 53-5, Wonhyoro 3 Ga, Yongsan-Gu, Seoul, 140- Se non ci sana dei centri assistenza autorizzati nella vostra zona, potete fare riferimento agli altri centri assistenza autorizzati, vedi elenco sopra.

  • Page 100: Limited Warranty

    DENON ELECTRONICS (USA), LLC (a D&M Holdings Company) 100 Corporate Drive Mahwah, NJ 07430-2041 (800) 497-8921 (888) 544-8434 Fax DENON REGIONAL SUPER SERVICE CENTERS (Repair only-No parts orders please) PYRAMID AUDIO UNITED RADIO SERVICE AUDIO SERVICES 305 E. Braker Lane 5717 Enterprise Parkway 544 Central Dr., Suite 101...
  • Page 101 Accident, act of nature, abuse, misuse, neglect, unauthorized product repair, opening of or modification or failure to follow instructions supplied with the product. b) Repair or attempted repair by anyone not authorized by DENON. c) Any shipment of the product (claim must be presented to carrier). (5) Items subject to "...
  • Page 102 • How to Obtain Warranty Performance If your unit ever needs service, it may be taken or shipped to any authorized DENON service station or D&M CANADA INC. (if you are uncertain as to whether • a service station is DENON authorized, please contact D&M CANADA INC. as listed below.) In all other cases, the following procedures apply whenever your unit must be transported for warranty service;...
  • Page 103 Duree du garantie non-transferable La garantie de votre produit DENON, distribue et garanti par D&M CANADA INC. prend effet 11 partir de la date d'achat du consommateur original au pres d'un revendeur official D&M CANADA INC. pendant les periodes suivantes,...

Table of Contents