Making Detailed Settings (Manual Setup) - Denon AVR-1910 Owner's Manual

Making detailed settings (Manual Setup)

Use this procedure to change the Audyssey Auto Setup settings or to change the various audio,
video and display settings.
The set can be used without changing these settings. Make these settings as necessary.
For a description of "Menu map" and operating instructions, see page 18.
Items that can be set with the Manual Setup procedure
n
Making the speaker settings (Speaker Setup) vpage 25
Making the HDMI settings (HDMI Setup) vpage 28
Making the audio settings (Audio Setup) vpage 29
Making the ZONE2 settings (ZONE2 Setup) vpage 30
Making other settings (Option Setup) vpage 30
n
Examples of Menu Screen Displays
Speaker Setup
4-1.Speaker Setup 4-2.HDMI Setup
1.Amp Assign Auto Lipsync
2.Speaker Config. HDMI Audio Out : Amp
3.Bass Setting HDMI Control
4.Distance
5.Channel Level
6.Crossover Freq.
7.Front Sp Setup
[ENT]:Select [RTN]:Back
ZONE2 Setup
4-4.ZONE2 Setup
Level Lch : 0dB
Level Rch : 0dB
Vol.Display : Relative
Vol.limit : OFF
Power On Lev: Last
Mute Lev. : Full
[RTN]:Back
Remote control
operation buttons
HDMI Setup Audio Setup
4-3.Audio Setup
: ON 1.EXT.IN SW Level
2.2ch Direct/Stereo
: OFF 3.Auto Surround Mode
4.EQ Customize
[RTN]:Back [ENT]:Select [RTN]:Back
Option Setup
4-5.Option Setup
1.Volume Control
2.Source Delete
3.On-Screen Display
4.Quick Select Name
5.ZONE Rename
6.Display
7.Setup Lock
[ENT]:Select [RTN]:Back
Displaying the menu
:
: Moves the cursor (Up/Down/Left/Right)
Cancel the menu
Making the speaker settings (Speaker Setup)
Use this procedure to set the speakers manually or if you wish to change the settings made with
the Audyssey Auto Setup procedure.
Setting items
Amp Assign
Normal : The surround back channel audio signals are output.
Sets the signal output to the
ZONE2 : The ZONE2 audio signals are output.
speaker connected to the Front A Bi-Amp : The bi-amp audio signals are output. Set this for bi-amp
SURR. BACK/AMP ASSIGN playback of the front A speakers.
Front B Bi-Amp : The bi-amp audio signals are output. Set this for bi-amp
terminals.
playback of the front B speakers.
Front Height : The front height channel audio signals are output.
Speaker Confi g. Front : Set the front speaker size.
• Large : Use of a large speaker that can adequately play back low
Select speaker confi guration
frequencies.
and size.
(bass reproduction capability) • Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
If "Subwoofer" is set to "No" , "Front" is automatically set to "Large" .
Center : Set the presence and size of the center speaker.
• Large : Use of a large speaker that can adequately play back low
frequencies.
• Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when a center speaker is not connected.
• " Large" is not displayed when "Front" is set to "Small".
NOTE
• E ven if "Center" has been set to "Large" , when "Front" is set to
Select "Large" or "Small" not
"Small" , the "Center" setting automatically switches to "Small" .
according to the physical size
Subwoofer : Set the presence of a subwoofer.
of the speaker but according
• Yes : Use a subwoofer.
to the low frequency
• No : Select when a subwooofer is not connected.
reproduction capabilities
based on the frequency set
When "Front" is set to "Small", "Subwoofer" can automatically set
at "Crossover Frequency" to "Yes".
(vpage 27).
: Decision the setting
ENGLISH
Default settings are underlined.
Setting contents
See overleaf
2
: Return to previous menu