Denon AVR-1910 Owner's Manual page 35

Setting items
On-Screen Display
Tuner Information
Make the settings related to
when a tuner operation is performed.
A lways : Show display continuously.
displays on the TV screen.
•
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
iPod Information
when an iPod operation is performed.
A lways : Show display continuously.
•
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
Quick Select Name Rename Label : Change the display name of the selected "Quick Select"
Change the Quick Select setting.
ui
name. 1. Use to select the name of the Quick Select setting you want
to change, then press
2. Use o p to set the cursor to the character you want to change.
ui
3. Use to change the character, then press
• Up to 16 characters can be input.
• The input character type can be switched by pressing
display name is being changed.
• The types of characters that can be input are as shown below.
GCapital lettersH
GSmall lettersH
GSymbolsH
GNumbersH
4. Repeat steps 2 and 3 to change the display name.
Template : The display name can be changed by selecting "Operation" and
"Device Name" from the previously set templates.
ui
1. Use to select the name of the Quick Select setting you want
to change, then press
2. Use ui to select "Template" , then press
ui
3. Use to select "Operation" , then press
• Watch / Listen to / Play / For
uio p
4. Use
• DVD / Blu-Ray / HDP / TV / Cable TV / Satellite / VCR / DVR / iPod /
V.AUX / LD / Movie (When "Operation" is selected to "Watch" .)
• CD / TUNER / iPod / MD / TAPE / Music (When "Operation" is
selected to "Listen to" .)
• PC / Game (When "Operation" is selected to "Play" .)
• Father / Mother / Son / Daughter / Brother / Sister / Grandfather
/ Grandmother / Me (When "Operation" is selected to "For" .)
Remote control
operation buttons
Setting contents
:
This sets the time the on-screen display is displayed
:
This sets the time the on-screen display is displayed
.
.
A B C D E F G HI JK LM N O P QRST U VWX Y Z
a b c d e f g h i jkl m n op q r s tuvw xy z
' ( ) b + – . / : ; < = > ? [ ]
(space)
01 2 34 5 6 7 89
.
.
.
to select "Device Name " , then press
Displaying the menu
:
: Moves the cursor (Up/Down/Left/Right)
Cancel the menu
Setting items
Quick Select Name
Zone Rename
Rename the display names
of the different zones as
desired.
Display
while the
Adjust display brightness of
the receiver.
Setup Lock
Protect settings from
inadvertent change.
.
Making detailed settings (Manual Setup)
Setting contents
Default : The changed display names are reset to the defaults.
• Yes : Reset to the defaults.
• No : Do not reset to the defaults.
ui
1. Use to select the zone name you want to change, then press
.
MAIN ZONE / ZONE2
2. Use o p to set the cursor to the character you want to change.
3. Use ui to change the character, then press
• Up to 10 characters can be input.
• The input character type can be switched by pressing
display name is being changed.
• The types of characters that can be input are as shown below.
ABCDEFG HI JKLM NO PQ RSTUVWXYZ
GCapital lettersH
abcdefghijklmnopqrstuvwxyz
GSmall lettersH
' ( ) b + – . / : ; < = > ? [ ]
GSymbolsH
0123456789 (space)
GNumbersH
4. Repeat steps 2 and 3 to change the display name.
• Bright : Normal display brightness.
• Dim : Reduced display brightness.
• Dark : Very low display brightness.
• OFF : Turns the display off.
Switching is also possible by pressing
• ON : Turn protection on.
• OFF : Turn protection off.
When "Setup Lock" is set to "ON" , the settings listed below can
no longer be changed. Also, "SETUP LOCKED!" is displayed if you
attempt to operate related settings.
・RESTORER ・Dynamic Volume
・MultEQ ・Channel Level
・Dynamic EQ ・Audio Delay
: Decision the setting : Return to previous menu
ENGLISH
.
while the
on the main unit.