Operations During Playback - Denon AVR-1910 Owner's Manual

TP Search
Use this function to find RDS stations broadcasting traffic programs
(TP stations).
1
Set to "MAIN/TV" and
to "MAIN".
2
Press to select "TUNER".
3
Press to select "TP SEARCH".
4
Press .
TP search begins automatically.
b If no TP station is found with the above
operation, all the reception bands are
searched.
b The station name is displayed on the display
after searching stops.
5
To continue searching, repeat steps
2 to 3.
b If no other TP station is found when all the frequencies have been
searched, "NO PROGRAMME" is displayed.
RT (Radio Text)
"RT" appears on the display when radio text data is received.
1
Set to "MAIN/TV" and
Front to "MAIN".
2
Press to select "TUNER".
3
Press to select "RT".
b While receiving an RDS broadcast station,
the text data broadcast from the station is
displayed.
b To turn the display off, press o p.
b
If no text data is being broadcast, "NO TEXT
DATA" is displayed.
n To end RDS search / PTY search / TP search / RT
• Do not operate anything for 15 seconds.
• When setting RT, press

Operations During Playback

Turning Off the Sound Temporarily (Muting)
Front
Press
• The sound is reduced to the level set at menu "Mute Level" (vpage
30).
• To cancel, press
the master volume.
Listening with Headphones
Plug the headphones into the PHONES jack on the main
unit.
The sound from the speakers and pre-out connectors is automatically
cut.
NOTE
• To prevent hearing loss, do not raise the volume level excessively
when using headphones.
• Unplug headphones when performing the Audyssey Auto Setup
procedure or other settings.
.
Switching the front speakers
Press
NOTE
When you set to "Custom" with "Front Speaker Setup" (vpage 27),
you cannot operate
Playing Components
.
again. Muting can also be canceled by adjusting
.
Front A Front B
Front A+B
.
ENGLISH
Front