Input Mode - Denon AVR-1910 Owner's Manual

ENGLISH
Making the video settings (Video)
The items that can be set depend on the input source and the "Assign" setting.
Setting items
Video Select Source : Play the picture and sound of the input source.
Switch video input source DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX : Select video input
while listening to audio source to view. This can be set for individual input sources.
signal.
NOTE
• It is not possible to select HDMI input signals.
• When playing HDMI video input signals, the analog video signal of
another input source cannot be selected for the HDMI video output.
• Input sources for which "Delete" is selected at "Source Delete" (vpage
30) cannot be selected.
• Input sources for which "None" is selected at "Assign" (vpage 33)
cannot be selected.
•
This can also be set by pressing
• To cancel, press
i/p Scaler
This can be set to the DVD
The input source's resolution
input sources.
is converted to the resolution
OFF : Do not use i/p scaler function.
set at "Resolution" .
Analog : Analog signals are converted to HDMI signals.
Analog and HDMI : Both analog signals and HDMI signals are converted
to the desired HDMI resolution.
Resolution
This can be set when the input source is set to DVD
Set the output resolution.
SAT/CBL
Resolution A : Analog Video
other than "OFF" .
Resolution H : HDMI
AUTO : Detect monitor panel resolution and automatically set output
resolution.
480p/576p / 1080i / 720p / 1080p : Select the output resolution.
Progressive Mode
This can be set when the input source is set to DVD
Select optimum progressive
SAT/CBL
mode for video material.
other than "OFF" .
AUTO : The video material is automatically detected and the appropriate
mode is set.
Video1 : Select mode suitable for video playback.
Video2 : Select mode suitable for video and 30-frame film material
playback.
Aspect
This can be set when the input source is set to DVD
Set the aspect ratio of the
SAT/CBL
video signal output from the
other than "OFF" .
HDMI terminal.
Normal : Output at 4:3 aspect ratio.
Full : Output at 16:9 aspect ratio.

Remote control
operation buttons
Default settings are underlined.
Setting contents
.
to select "Source" .
HDP TV SAT/CBL VCR
VCR DVR V.AUX , and when "i/p Scaler" is set to anything
VCR DVR V.AUX , and when "i/p Scaler" is set to anything
VCR DVR V.AUX , and when "i/p Scaler" is set to anything
Displaying the menu
: : Moves the cursor (Up/Down/Left/Right)
Cancel the menu
Changing the Input Source's Input Mode and Decoding mode

(Input Mode)

The selectable input modes depend on the input source and "Assign" setting (vpage
33 "Changing the input sources assigned to the input terminals").
Setting items
Input Mode
Set the audio input modes for
the different input sources.
DVR V.AUX
HDP TV
HDP TV
HDP TV
Making the input settings (Input Setup)
Default settings are underlined.
Setting contents
Auto : Automatically detect input signal and perform playback.
HDMI : Play only signals from HDMI input. (Excluding CD)
Digital : Play only signals from digital input.
Analog : Play only signals from analog input.
EXT. IN : Play only signals from EXT. IN input.
b Upon purchase, the settings of the different input sources are as shown
below.
Input
DVD HDP TV
source
Default
Auto HDMI Digital
setting
Input
DVR V.AUX CD
source
Default
Auto Analog Analog
setting
• T he "HDMI" settings are made for input sources for which HDMI
input terminals are assigned at "Assign" (vpage 33).
• T he "Digital" settings are made for input sources for which digital
input terminals are assigned at "Assign" (vpage 33).
• When a digital signal is properly input, the "
the display. If the " " indicator does not light, check the digital
input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to "EXT.
IN" .
• This can also be set by pressing .
Each time you press the button, the input mode display will change.
Auto HDMI
EXT. IN Analog
: Decision the setting : Return to previous menu
SAT/CBL VCR
Auto Analog
TUNER
Analog
" indicator lights on
Digital