Denon AVR-1910 Owner's Manual page 19

Recording Components
Digital Video Recorder
Select the terminal to use and connect the device.
For instructions on HDMI connections, see "Connecting Devices
Equipped with HDMI terminals" on page 12.
Digital Video Recorder
L R
L R
Set as necessary
Set this to change the input signal to which the input source is
assigned.
"Assign" (vpage 33)
NOTE
• To record video signals through the AVR-1910, use the same type of video
cable for connection between the AVR-1910 and the player as the cable
used for connection between the AVR-1910 and the recorder.
• Do not connect the output of the component connected to the AVR-1910's
OPTICAL2 output connector to any input connector other than OPTICAL2.
• Digital signals are not output from the analog REC OUT connector.
Video Cassette Recorder
Select the terminal to use and connect the device.
For instructions on HDMI connections, see "Connecting
Devices Equipped with HDMI terminals" on page 12.
Video cassette recorder
L R L R
L R L R
Set as necessary
Set this to change the input signal to which the input source
is assigned.
"Assign" (vpage 33)
NOTE
• To record video signals through the AVR-1910, use the same
type of video cable for connection between the AVR-1910 and
the player as the cable used for connection between the AVR-
1910 and the recorder.
• Digital signals are not output from the analog REC OUT
connector.
Connecting Devices not Equipped with HDMI terminals
SAT/CABLE Tuner
Select the terminal to use and connect the device.
For instructions on HDMI connections, see "Connecting
Devices Equipped with HDMI terminals" on page 12.
SAT/CABLE Tuner
L
L R
L
L R
Set as necessary
Set this to change the input signal to which the input source
is assigned.
"Assign" (vpage 33)
ENGLISH
R
R