Deleting A Loop; Delete Loop From Internal/External Memory - DigiTech JamMan SOLO XT Owner's Manual

Deleting a Loop

The JamMan Solo XT uses both internal memory and optional external Micro SD/
SDHC memory cards for the storage of loop files. Loops can be deleted one at a time
to make room for other loops. You can delete loops from both internal memory and
external memory.
The deletion of a loop cannot be undone! You should backup any loops you wish to
WarNINg!
keep, using the JamManager XT loop librarian management software, before deleting them.
To delete a loop from internal or external memory:
Select the desired memory location
1.
using the
<UP/DOWN>
Press and hold the
2.
for two seconds until the display
shows
ErL
button LED will begin flashing waiting
for a delete confirmation.
If the display shows Eri or ErC,
NOTE:
you have held the <STORE> button too
long and need to press the <PEDAL
SWITCH> to abort the procedure and
start over.
28
buttons.
<STORE>
then release. The
STORE
Press the
3.
display will read
button To continue with the deletion of the
4.
loop, press and hold the
button until the display reads
release. To abort procedure, press the
<PEDAL SWITCH>
button again. The
<STORE>
? (Erase Loop?).
E
<STORE>
.
then
dEL