Recording A Loop Using The Aux In Jack - DigiTech JamMan SOLO XT Owner's Manual

Recording a Loop Using the AUX IN Jack

The JamMan Solo XT can record stereo loops using the AUX IN 1/8" mini jack. This
jack can be connected to portable music players for practicing or learning new songs.
Recording loops from the AUX IN jack is the same as recording your instrument
loops using the 1/4" LEFT/RIGHT INPUT jacks. It is recommended to use the Auto
Record option when recording from the AUX IN jack (see "
information on enabling Auto Record).
To record a loop from the AUX IN jack:
Select an empty memory location
1.
using the
<UP/DOWN>
( and
LOOP SINGLE
Press the
2. <PEDAL SWITCH>
the recording, indicated by a flashing
red LED.
STATUS
Press play on your portable music
3.
player.
As soon as you're done recording,
4.
press the
<PEDAL SWITCH>
stop recording and initiate playback.
buttons
LEDs will be off).
to arm
again to
Setup > Auto Record
Quickly press the
5.
twice to stop loop playback.
Press the
6. <STORE>
you wish to store the loop.
" for
<PEDAL SWITCH>
button twice if
19