Loop Undo - DigiTech vocalist live fx Owner's Manual

Loop Undo

This system parameter is used to turn the Loop Undo function on and off. When
turned on, overdubs recorded using the Live FX's built-in phrase looper can be
undone on-the-fly by simply pressing and holding the <Down> footswitch for 2
seconds.
To edit the LOOP UNDO setting:
1. Press the <System> button.
2. Press the <DATA> encoder once to navigate to page 2 within the System Edit
menu.
3. Turn the <Edit 3> knob to select the desired setting.
4. Press the flashing <System> button to exit the System Edit menu.
NOTE: The Loop Undo option will determine the maximum allowable loop
recording length. The below table shows how this setting will affect the available
loop recording time.
Undo Enabled
Undo Disabled 70 Seconds
34
Maximum Loop Recording Time
35 Seconds
Owner's Manual