Table of Contents
Advertisement
Tempo
The Tempo setup menu displays the loop tempo in BPMs (beats per minute) and
allows you to manually adjust the tempo setting. You can first set a tempo by using
the
button and then adjust it further in this menu. An empty loop has no
<TEMPO>
tempo so pressing the
default tempo of 120BPM. You can also adjust (Time Stretch) the tempo of a stored
loop using this option without changing pitch of the phrase (see "
").
Stretching a Phrase
To set the Tempo before recording a loop:
Select an empty memory location
1.
using the
<UP/DOWN>
(
and
LOOP
SINGLE
Press the
2.
<SETUP>
appears in the display.
tPO
Use the
3.
<UP/DOWN>
adjust the tempo. If a tempo has not
been set, pressing either button once
will set the default tempo of 120BPM.
You can also set the tempo by tapping the <PEDAL SWITCH> (when Pedal Tempo is
NOTE:
enabled). See "Operation > Recording a Loop (Auto Quantize)".
buttons while in the Tempo menu will set a
<UP/DOWN>
buttons
LEDs will be off).
button twice until
buttons to
Once tempo is set, press the
4.
button twice to store
<STORE>
the changes or press the
to exit the Setup menu
SWITCH>
without storing.
Operation > Time
<PEDAL
43
Advertisement
Table of Contents
