Deleting Individual Loop Phrases - DigiTech JAMMAN STEREO Owner's Manual

Looper/phrase sampler
Hide thumbs Also See for JAMMAN STEREO:
Table of Contents

Advertisement

Deleting Individual Loop Phrases

The JamMan
®
to delete the contents of a memory location so it may be reused or to free up
memory. To delete a loop from a memory location, follow these steps:
1.
Press the
2.
Press the
button will begin flashing waiting for a delete confirmation.
NOTE: If the
button too long and need to abort this procedure and start over.
Press the
3.
Press the
The button will continue to flash. To abort this procedure at any
time, press the
4.
If you want to delete the contents from this memory location
and return it to its default state, press and hold
two seconds. The
procedure is complete the display will return to the memory number
and the
Warning: Deleting a memory location is irreversible and will
erase any recorded information that resides here. Use the Delete
function with caution.
50
Stereo has 99 memory locations and at some time you may need
button. It will now be lit.
sHIft
button. The
DeLete
DIsPLaY
button at this point to abort the Delete procedure.
eXIt
button again. The
DeLete
button at any time.
eXIt
DIsPLaY
and
eXIt
DeLete
shows EL (Erase Loop). The
DIsPLaY
shows Ei or EC, you have held the
DIsPLaY
will briefly read dE. When the delete
buttons will turn off.
DeLete
reads E? (Erase Loop?).
button for
DeLete

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jamman stereo jml2

Table of Contents