DigiTech JamMan SOLO XT Owner's Manual page 44

To record a loop the same length as
6.
the master loop, press the
SWITCH>
before or just after the master
device's loop end point. You can also
record loops 2 or more times longer
than the master loop on the slave
device. The loop length needs to be a
multiple of the master's loop length.
Once the loop end point is set on
the slave device, the synced loops will
continue to playback together.
When recording to multiple JamMan Solo XTs as described above, you can also add
HINT:
overdubs to any recorded loops just as you can when using a single JamMan Solo XT.
38
<PEDAL
on the slave device just
If you wish to store the new loops,
7.
press the
<STORE>
each device.
button twice on