DigiTech DIGIDELAY Manual
  1. Manuals
  2. Brands
  3. DigiTech Manuals
  4. Music Pedal
  5. DIGIDELAY
  6. Manual

DigiTech DIGIDELAY Manual

Digital delay
Hide thumbs

Advertisement

Table of Contents

Advertisement

Table of Contents
loading

Related Manuals for DigiTech DIGIDELAY

Summary of Contents for DigiTech DIGIDELAY

  • Page 2 European Contact: Your local DigiTech Sales and Service Office or not operate normally, or has been dropped. 11.WARNING:To reduce the risk of fire or electric...
  • Page 3 6.The consumer forfeits the benefits of this warranty if the product's main assembly is opened and tam- pered with by anyone other than a certified DigiTech technician or, if the product is used with AC volt- ages outside of the range suggested by the manufacturer.
  • Page 4 The DigiDelay is a unique delay pedal, combining several features that have never been available in a standard stompbox. The DigiDelay offers 4-seconds of delay, four different delay types including ping-pong, tape, reverse, modulated, and a loop function. The Loop function records loops up to 4 seconds in length that you can add overdubs to.
  • Page 5 2 3 4...

  • Page 6: Ac Adapter Jack

    3. AC Adapter Jack Connect a DigiTech PS200R power supply to this jack. Use the proper supply for your area’s Mains line voltage. 4.Time Knob Controls the amount of delay time specified by the range selected with the Mode (5) knob. The knob’s minimum position is the shortest delay time for the given range.
  • Page 7 Select one of the following: 1-10-250 MS - 10 to 250 milliseconds 2-250 MS-1 SEC - 250 milliseconds to 1 second 3-1-4 SEC - 1 to 4 seconds 4-TAPE* - Emulates a vintage tape delay 5-MOD DLY* - A digital delay with chorused repeats 6-REVERSE* - A delay where the repeats are played backwards 7-LOOP - A repeat/hold function that lets you create infinite loops of up to four seconds in length.

  • Page 8: Indicator Led

    7. Pedal Release Pins These two pins are spring-loaded hinges that hold the pedal in place. Push these pins in to release the pedal from the pedal chassis exposing the battery compartment. (See battery replacement diagram). 8. Pedal Press the pedal to turn the effect on and off. The Pedal is also used for tapping in the delay time when using the Tap Tempo delay feature.

  • Page 9: Tap Tempo Delay

    Use both this output combined with Out 1 for a more enhanced chorusing effect when using the Modulated Delay. Tap Tempo Delay The DigiDelay’s Pedal can be used as a tap-tempo switch for setting the delay time during a live performance. To use the Pedal for tap-tempo, follow these steps: 1.While the delay effect is on, press and hold the Pedal (8) for 3...
  • Page 10 The Indicator LED is lit solid red as long as the pedal is held, indicating that anything played will be added to the loop. 5.To stop the loop, quickly press the Pedal. This puts the DigiDelay into Bypass. The loop stops playing and the delay loop memory is cleared.
  • Page 11 Connections The DigiDelay has a single input and a pair of outputs. Out 1 is used if the DigiDelay is being connected to only one amplifier. Out 2 is used for stereo operation. Connect Out 1 to the first amplifier and Out 2 to the second amplifier.
  • Page 12 CIT™ Cabinet Modeling The DigiDelay also has built-in CIT™ cabinet modeling. This is useful when running a distortion pedal into the DigiDelay and then running directly into a mixer or recorder. CIT cabinet modeling creates a guitar- through-an-amplifier sound without having to use a guitar amp.
  • Page 13 1. Begin with the power disconnected from the DigiDelay. 2. Press the Pedal (8) down and apply power (do this by connecting a guitar cable to the DigiDelay Input Jack (6) or connect the PS200R power supply to the AC Adapter Jack (3)). When the Indicator LED (10) has stopped flashing, release the Pedal.

  • Page 14: Battery Replacement

    Battery Replacement 1. Using the tip of a 1/4” guitar cable, push one of the release pins in on either side of the pedal, and remove the pedal from the pedal chassis. 2. Remove the battery from the battery compartment and disconnect the battery cable.
  • Page 15 Pedal Pedal Switch 9V DC Battery Pedal Release Battery Compartment Pedal Release Spring Pedal Chassis...

  • Page 16: Specifications

    PH (801) 566-8800 • Input Impedance - 1 MOhms FAX (801) 566-7005 • Output Impedance - 100 Ohms DigiTech and X-Series are trademarks • Power Supply - 9V Alkaline Dry Battery of the Harman Music Group Inc. • Power Consumption - 4.8Watts...

Table of Contents