Basic Specs; In/2 Out; Programmable Fx Loop; Signal Flow - DigiTech 2112 Owner's Manual

B S
ASIC PECIFICATIONS
1 I 2 O
NPUT AND UTPUTS
With the 2112, the input and output are set up in a mono input and stereo or mono output configurations.The input
jack of the 2112 is located on the front panel of the unit.The output jacks are TRS (tip-ring-sleeve), and are a Left
(mono) and Right output configuration for full stereo separation of effects.
P M
ROGRAMMABLE
For those of you that feel the need to add additional effects to the already extensive menu of sounds , the 2112 pro-
vides a programmable line level mono programmable FX loop.The signal leaves the unit after the Wah section of the
2112 and returns just before the Dual distortion paths. For a better representation of the FX loop, please refer to the
signal flow chart below.
S F
IGNAL LOW
Listed below, is a chart showing the signal flow path of the 2112. Notice that with the 2112, you have the choice of
selecting either one or both of the Distortion signal paths. Also take notice that a noise reduction system is available
in the Analog Preamp section and the first DSP section, making for ultra-quiet performance.
Analog Section
Input Buf.
St. Gate
DSP Section-1 (TI 070 Chip)
C O C
ONTROL NE OMPATIBILITY
The 2112 is an ideal stand alone multi effects processor, but to out-do ourselves, we have made the 2112 compatible
to use with the legendary Control One foot controller.The optional Control One can help you maximize the poten-
tial of your 2112. Since the Control One "talks" to the 2112 using a proprietary communication protocol. It offers bet-
ter response time and capabilities not available with conventional MIDI pedalboard controllers.
The Control One includes 12 footswitches for Program and Parameter control. It also features a built-in Expression
pedal.The Control also gives you the option of adding another expression control (via the external expression pedal
jack which is located on the front of the Control One footcontroller). Combined with the Expression controller
insert (located on the rear panel of the 2112) this gives you a grand total of 3 Expression controllers in one box!. The
large 20 character display constantly feeds you important information like program names, CC info, and tuner indica-
tors.
8
B (TRS)
ALANCED
FX L
ONO OOP
Gate Det.
FX Loop
Clip LED
Comp
10 GEQ
Speaker
Cabinet
10 GEQ
Emulator
SS Dist.
Wah
Tube Dist.
Global/
Local
S-DISC II
3-Band
EQ
DSP Section-2 Dual (S-DISC IIs)
Bar
Graph
A/D
SoloBoost
S-DISC II