Copying A Loop - DigiTech JamMan SOLO XT Owner's Manual

Copying a Loop

The JamMan Solo XT provides a way to copy loops to other memory locations. This
can come in handy when you want to change loop attributes (such as tempo) or
experiment with overdubs without affecting the original loop.
To copy a loop to another memory location:
Select the loop which you would
1.
like to copy using the
buttons.
Press the
2. <STORE>
Use the
3. <UP/DOWN>
select the desired memory location
for which to copy the loop. Make sure
you select an empty memory location
( and
LOOP SINGLE
If dF appears in the display, this indicates the internal or external memory is full. Loops
NOTE:
should be archived using the JamManager XT librarian and then deleted from the JamMan Solo XT
to free up memory.
<UP/DOWN>
button once.
buttons to
LEDs will be off).
Press the
4. <STORE>
copy the loop to the newly selected
memory location.
button again to
27