Table of Contents
Advertisement
Multiple Loop Playback (Cueing Loops)
The JamMan Solo XT allows you to cue up loops for seamless multi-loop playback.
This can be used to playback a sequence of loops for creating an entire song.
To cue a loop:
While a loop is playing, press the
1.
or
<UP>
<DOWN>
the loop which you wish to cue. The
loop memory location number in the
display will flash, indicating the loop is
cued for playback.
Once the current loop reaches its
2.
loop end point, the cued loop will
seamlessly begin playing.
Repeat step 1 to cue another loop.
3.
If either the <UP> or <DOWN> button is pressed less than two seconds before the end
NOTE:
of a playing loop, the JamMan Solo XT will not have enough time to cue up the next loop and the
current loop will continue to play one more time. You can also use the optional FS3X footswitch for
hands-free cueing of loops. See "Optional FS3X Footswitch > Multiple Loop Playback with FS3X".
20
button to select
Advertisement
Table of Contents
