Erase All Loops - Internal Memory - DigiTech JAMMAN STEREO Owner's Manual

Erase All Loops - Internal Memory

The JamMan
®
for the storage of loop files. You can erase all loops from internal memory
or from card memory without having to delete them one at a time.
To erase all loops from internal memory, follow these steps:
1. Select a loop memory location that does not light the
2. Enable the
3. Press and hold the
Internal Memory Loops) appears in the Display and release (EL will
show briefly first but keep holding the button until Ei appears). The
DeLete
4. Press the
The
DeLete
press the
5. To erase all internal loop memories, press and hold the
for two more seconds. The
is being erased. When the delete procedure is complete the display
will return to the memory number and the
will turn off.
52
Stereo uses both internal memory and optional card memory
button.
sHIft
DeLete
button will begin flashing.
button again. The
DeLete
button will continue to flash. To abort this procedure,
button.
eXIt
button for four seconds until Ei (Erase
DIsPLaY
will show Bu indicating the card
DIsPLaY
caRD MeM
reads E? (Erase Loops?).
DeLete
and
eXIt DeLete
LED.
button
buttons