Maintenance And Inspection; Spindle Maintenance - Roland EGX-350 User Manual

6-2 Maintenance and Inspection

Spindle Maintenance

The spindle unit and the belt are parts that wear out. The replacement cycle varies according to usage conditions, but
as a general guide, you should replace them after every 2,000 hours of use.
This machine is provided with a feature for displaying the total working time of the spindle unit. Refer to this to
determine when replacement is needed.
For information on how to perform replacement, refer to the documentation included with the ZS-35 replacement
spindle.
P. 85, "Submenus"
98 Chapter 6 Maintenance