Spindle Operation; Starting And Stopping Spindle Rotation - Roland EGX-350 User Manual

3-5 Spindle Operation

Starting and Stopping Spindle Rotation

This manually starts and stops rotation of the spindle. You perform the operation using the handy panel.
P. 35, "Spindle Run-in (Warm-up)"
Procedure
–
Close the front cover.
—
Spindle rotation speed
˜
This operation cannot be performed in the following situations.
➢ When the machine is performing some operation
➢ When the front cover is open (in which case the screen shown in the figure below is displayed)
P. 103, "Responding to a Message"
At the main screen, press and hold
or longer.
A beep is heard, and the spindle starts to turn.
Press .
The spindle stops turning, a beep is heard.
for one second
Chapter 3 Basic Operation 47