Installation; About Emplacement And Installation; Installation Environment - Roland EGX-350 User Manual

2-2 Installation

About Emplacement and Installation

WARNING Unloading and emplacement are operations that must be performed by 2 persons
or more.
Tasks that require undue effort when performed by a small number of persons may result
in physical injury. Also, if dropped, such items may cause injury.
The weight of the machine alone is 34 kg (75 lb.). Perform unloading and emplacement with care.

Installation Environment

Install in a quiet, stable location offering good operating conditions. An unsuitable location can cause accident, fire,
faulty operation, or breakdown.
Install in a location that is level and stable.
WARNING
Installation in an unsuitable location may cause an accident, including a fall or tipover.
WARNING Never install in a location exposed to open flame.
Cutting waste may ignite. Powdered material is extremely flammable, and even metal
material may catch fire.
WARNING Never install close to any flammable object or in a gas-filled location.
Combustion or explosion may be a danger.
Never install out of doors or in any location where exposure to water or high
WARNING
humidity may occur.
Doing so may result in fire or electrical shock.
Position so that the power plug is within immediate reach at all times.
WARNING
This is to enable quick disconnection of the power plug in the event of an emergency.
Install the machine next to an electrical outlet. Also, provide enough empty space to allow
immediate access to the electrical outlet.
➢ Never install in a location subject to wide fluctuations in temperature or humidity.
➢ Never install in a location subject to shaking or vibration.
➢ Never install in a locations where the floor is tilted, not level, or unstable.
➢ Never install in a dusty or dirty location, or out of doors.
➢ Never install in a location exposed to direct sunlight or near air-conditioning or heating equipment.
➢ Never install in a location exposed to considerable electrical or magnetic noise, or other forms of electromagnetic
energy.
Chapter 2 Installation and Setup 27