Other Information; Replacement Cutters; Daily Care And Maintenance - Roland EGX-20 User Manual

6 Other Information

Replacement Cutters and Consumable Parts
The following replacement blades and consumable parts are available.
Replacement Cutters (Diameter 3.175 mm and Length 114 mm)
General-purpose (general-purpose cutters suitable for engraving acrylic and plastic plates)
No.
• ZEC-A2013
• ZEC-A2025
• ZEC-A2051
• ZEC-A2076
Flat cutter (blades having a wider tip than general-purpose cutters)
No.
• ZEC-A2150
• ZEC-A2190
• ZEC-A2230
• ZEC-A2320
Quarter-round types (having a larger tip pocket than general-purpose cutters, and suited to
engraving soft material at high speed)
No.
• ZEC-A2013-QR
• ZEC-A2025-QR
Adhesive Sheet
No. Specification
• AS-10 210 mm x 140 mm, 10 sheets
Replacement Spindle-motor Unit
As a general guide, we recommend replacing this after every 1,000 hours.

Daily Care and Maintenance

• Use a vacuum cleaner to carefully clean away cutting dust.
• Use a toothbrush or the like to remove cuttings from the adhesive sheet.
• Do not use an air blower or the like to blow away cutting dust. The cuttings may get inside the machine and cause breakdown.
• Use a dry or well wrung-out cloth to wipe clean. Do not use solvents such as thinner or alcohol.
• Lubrication is not required. Improper application of grease or the like may actually lead to breakdown and should not be attempted.
Blade width
0.127 mm
0.254 mm (* This is the originally included blade.)
0.508 mm
0.762 mm
Blade width
1.52 mm
1.91 mm
2.29 mm
3.175 mm
Blade width
0.13 mm
0.25 mm
6 Other Information
41