The Vga Input Clipping Indicators; Vga F Buttons; Status Strip - Roland VS-2480 Owner's Manual Addendum

•
•

The VGA Input Clipping Indicators

The VGA main display's input clipping indicators light when an input
channel's analog input signal is too loud. The INPUT PEAK LEVEL
parameter sets the level at which they light—see Owner's Manual 362.

VGA F Buttons

PAGE
The F buttons beneath the VGA main display's content pane (Page 21)
mirror the current behavior of the F buttons beneath the VS-2480's
internal LCD, as does its PAGE button. You can click the VGA's F buttons
or the LCD's at any time with the same results.
PAGE shows the number of screens associated with the current display.
You can move from page to page by pressing
If you prefer, press F1-F6 on a connected ASCII keyboard instead of clicking with your
mouse or pressing the VS-2480's physical F buttons. Use Tab as your PAGE button.

Status Strip

The status strip contains flashing indicators that signal the activation of certain features
and modes that might not otherwise be visually obvious.
When:
one or more channels are soloed
one or more channels are muted
Mastering Room playback is turned on
Mastering Room recording is turned on
phrase sequencer recording is turned on
Automix recording is turned on
Roland VS-2480 Owner's Manual, Version Two Addendum
Aux send levels—press the KNOB FADER ASSIGN/AUX SEND 1-8 button on the
VS-2480 and press the Aux bus's number on the keypad.
a parameter of your choice—press the KNOB FADER ASSIGN/AUX SEND 1-8 button
on the VS-2480 and press 9 on the keypad.
4—VGA Main Display Universal Elements
F buttons
and .
The status display flashes:
"SOLO" in blue
"MUTE" in yellow
"MASTERING PLAY" in green
"MASTERING REC" in red
"PHRASE SEQ REC" in red
"AUTOMIX REC" in red
www.RolandUS.com
66, 67
33