Roland VS-2480 Owner's Manual Addendum page 58

6—VGA Main Display CH VIEW Screens
1. DYNAMICS On/Off Button
Turn the dynamics processor on or off by clicking this button—
when it's blue, the processor is turned on.
2. RESET Button
Click RESET to return the dynamics processor to its factory default settings.
3. Interactive Dynamics Display
The interactive dynamics display lets you draw the shape of
your processing. Click and drag on any of the red triangles to
set the corresponding dynamics parameter.
Owner's Manual Page 161 explains how to understand what you
see in the graphic dynamics display.
4. Dynamics Type Selector
Click the desired button to select the type of dynamics processing you
want to use.
5. IN/OUT/GR Meters
These meters show, respectively, the signal coming into the processor, going out of it,
and the amount of dynamics processing being applied.
Type-Specific Parameters
The type-specific parameters change according to the type of dynamics processing you
select. These parameters are described in Owner's Manual Chapter 11.
Compressor Parameters
Parameter:
KEY IN
RATIO
THRESHOLD
ATTACK
RELEASE
A.GAIN
LEVEL
Expander Parameters
Parameter:
KEY IN
RATIO
THRESHOLD
ATTACK
RELEASE
58 www.RolandUS.com
See Owner's Manual Page:
See Owner's Manual Page:
Roland VS-2480 Owner's Manual, Version Two Addendum
160
158
159
160
160
160
160
160
158
159
160
160