Input Jack; Output Jack - Roland BOSS OD-200 Owner's Manual

Panel Descriptions
14
[MEMORY/BOOST] switch
Switches memories (p. 8).
Long-press the [MEMORY/BOOST] switch to turn the
booster on/off.
MEMO
The function of the footswitch can be changed by
"MFC"
(MEMORY SWITCH FUNCTION)
Rear Panel
(Connecting Your Equipment)
* To prevent malfunction and equipment failure, always turn down the
volume, and turn off all the units before making any connections.
A
6
.
D
B C
A

INPUT jack

Connect your guitar, bass, or effect unit here.
Turning On/Off the Power
The INPUT jack also operates as the power switch. The
power turns on when you insert a plug into the INPUT
jack.
When powering up
Power-up equipment such as your guitar amp last.
When powering down
Power-down equipment such as your guitar amp first.
* Before turning the unit on/off, always be sure to turn the volume
down. Even with the volume turned down, you might hear some
sound when switching the unit on/off. However, this is normal and
does not indicate a malfunction.
B

OUTPUT jack

Connect this jack to your amp or effector.
C
CTL 1, 2/EXP jack
Using the jack as CTL 1, 2
You can connect a footswitch (sold separately: FS-5U,
FS-6, FS-7) and use it to switch the booster ON/OFF or
switch memories (p. 9).