8-Vga Main Display Ez Routing Screen; Making Connections; Routing On The Vga Using A Mouse - Roland VS-2480 Owner's Manual Addendum

8—VGA Main Display EZ ROUTING Screen
The VGA main display displays all four of the VS-2480's EZ ROUTING screens at the
same time to make all of your routing simple to perform.
PATCH
TRACK
ASSIGN
To display the EZ ROUTING screens, press EZ ROUTING on the VS-2480 or select
ROUTING VIEW from the EZ ROUTING menu (Page 26).
On the VGA main display, the VS-2480's top-panel analog inputs and rear-panel inputs
and outputs look just like their physical counterparts on the VS-2480 itself, making it
easy to visualize the input and output connections you're making.
The F buttons beneath the EZ ROUTING screen are the same as those found on the
VS-2480's internal LCD EZ ROUTING screens.
The LOAD and SAVE features behave as described in Owner's Manual Chapter 23.

Making Connections

Routing on the VGA operates on the same principles as routing on the VS-2480's
internal LCD. To learn about routing, see Owner's Manual Page 231.
You can route signals on the VGA by:
•
•

Routing on the VGA Using a Mouse

To perform routing your mouse, position the mouse cursor over the desired
connection point until it turns into a pointing finger and then drag your mouse
to the desired destination.
Roland VS-2480 Owner's Manual, Version Two Addendum
BAY
pane
pane
selecting the desired connection node with the
the TIME/VALUE dial to make the desired connection.
dragging the desired connections into place using your mouse.
OUTPUT
ASSIGN
pane
LOOP
EFFECT
ASSIGN
pane
, , or buttons and turning
www.RolandUS.com 79