Loading An Automix; Mouse-Based Phrase Trimming - Roland VS-2480 Owner's Manual Addendum

Loading an Automix

1. Hold down SHIFT and press AUTOMIX to display the AUTOMIX screen.
2. Press F3 (LOAD)—the Automix loading screen appears.
3. Highlight the Automix you want to load.
4. Press F5 (OK)—the VS-2480 asks "Load Automix Pattern?"
When you load an Automix, it replaces the currently loaded Automix. If you don't want
to lose your current Automix, makes sure to save it before loading a different one.
5. Press ENTER/YES to proceed or EXIT/NO to cancel the loading.

Mouse-Based Phrase Trimming

Version Two allows you to easily and quickly trim the front or back of a track phrase
using your mouse—this serves the same purpose as the TRIM IN and TRIM OUT
phrase editing operations, though it's much faster. By simply dragging the phrase edge
you want to trim, you can change where a phrase begins or ends.
Using the Mouse To Trim the Front or Back of a Phrase
1. Press HOME•DISPLAY and use the
2. To prepare to trim:
3. To trim:
4. Release the mouse button to execute the trim.
You can use the VS-2480's Undo feature to reverse a mouse trimming operation you'd
like to do over.
You can drag a phrase's edge as far as the beginning or end of the take on which the
phrase is based, and no further.
Roland VS-2480 Owner's Manual, Version Two Addendum
magnification as desired.
• the front of a phrase —hold the mouse cursor over the
phrase's leading edge until the trim in cursor appears.
• the back of a phrase —hold the mouse cursor over the
phrase's trailing edge until the trim out cursor appears.
• the front of the phrase —click and drag to the right.
• the back of the phrase—click and drag to the left.
2—Version Two Enhancements
, , and/or buttons to set the display's
www.RolandUS.com
Trim in
Trim out
15