Key Light; Key Light Dialog Box - NEC Dterm PSIII User Manual

NOTE
Figure 3-25 Key Light dialog box
NOTE
Dterm PSIII User Guide - Revision 1
To Turn Off Key Click
Press FNC+3+1+5. A Key Click dialog box displays
Step 1
For Mode 2* systems, select [2] Off and then press the FNC key or 2.
Step 2
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.

Key Light

This feature controls the backlight of the keys.
To Turn Key Light On
Press FNC+3+1+6. A Key Light dialog box displays
Step 1
Key Light
[1]On
[2]Off
For Mode 2* systems, select [1] On and then press the FNC key or 1.
Step 2
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Turn Off Key Light
Press FNC+3+1+6. A Key Light dialog box displays
Step 1
For Mode 2* systems, select [2] Off and then press the FNC key or 2.
Step 2
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
Using the PSIII 3-25
(Figure 3-24).
(Figure 3-25).
(Figure 3-25).