Using The Psiii; Displays And Keys - NEC Dterm PSIII User Manual

3

Using the PSIII

Chapter Topics
Figure 3-1 Displays and Keys
LED Ring Indicator
Flashing light indicates an incoming call.
Headset Jack
LCD
Hold
Press to place a call on hold.
Press to control Keylock On/Off.
(Hold the key down for more than 1.2~2 seconds)
Battery Compartment (in back)
Programming Interface
(on Right Side)
Dterm PSIII User Guide - Revision 1
• Basic Operations
• PSIII Features
Snub-Nose Antenna.
No need to pull out or adjust.
L1 Button
Press to make or answer a call.
L2 Button*
Press to make or answer a call on the second line.
FNC (function) and Scroll Key
(FNC Key)
Press to activate various PSIII features.
(Scroll Key)
(End Power On/Off Key)
END/PWR
Push once to end a call. Press for more than two
seconds to turn power on and off.
CLEAR
Press to clear entry.
Press to control courtesy mode On/Off.
(Hold the key down for more than 1.2~2 seconds)
TRF/SHIFT
Press to transfer a call.
Press to switch between small and capital letter.
Microphone
*Mode 2 features are only available with NEAX 2000
(Series 1900 software or later) and NEAX 2400
(Series 7300 software or later). Zone Transceiver
5.00 software (or later) must be used.
3-1