Password Dialog Box - NEC Dterm PSIII User Manual

Figure 3-69 Password dialog box
NOTE
NOTE
NOTE
WARNING
Dterm PSIII User Guide - Revision 1
Press the FNC key to enter the password.
Step 5
Retype the password and press the FNC key to confirm. A New
Step 6
Password confirmation screen displays.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Cancel the Password
Press FNC+3+7+4. A Password dialog box displays
Step 1
Select [2] Reset, or press the FNC key or 1. For Mode 2* systems, a
Step 2
Password dialog box displays
Password?
Type in the current password.
Step 3
Press the FNC key to confirm. A Password Reset confirmation screen
Step 4
displays.
The Password has now been reset.
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
Protect Directory
This feature enables you to protect the directory to ensure the privacy of
stored telephone numbers.
This will also prevent all access to the directory, (i.e. view, add, edit or delete).
Using Reset All will delete all numbers in the directory even if Protect Directory is on.
Using the PSIII
(Figure
(Figure 3-69).
3-49
3-66).