Reset All Confirmation Dialog Box; Execute Dialog Box; Soft Key Dialog Box - NEC Dterm PSIII User Manual

3-54 Using the PSIII
Figure 3-75 Reset All Confirmation dialog box
Figure 3-76 Execute dialog box
NOTE
Figure 3-77 Soft Key dialog box
Reset All?
Press the FNC key to confirm. An Execute dialog box displays
Step 4
(Figure 3-76).
Execute?
Press the FNC key to confirm. A confirmation screen displays.
Step 5
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
Press the FNC key to confirm.
Step 6
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
Access Soft Keys
The following is an example of soft key codes (when they have been
programmed).
Press FNC+4. A Soft Key dialog box displays
Step 1
Soft Key
[1]PICK
[2]PARK
[3]CAMP
Select the soft key by using the Scroll
Step 2
Press the FNC key or the number to confirm. A Pick dialog box displays
Step 3
(Figure 3-78).
(Figure 3-77).
or Scroll keys.
Dterm PSIII User Guide - Revision 1