Station Ring; Station Ring Pattern Dialog Box; Station Ring Options Dialog Box - NEC Dterm PSIII User Manual

Figure 3-39 Station Ring Pattern dialog box
Figure 3-40 Station Ring Options dialog box
NOTE
NOTE
Dterm PSIII User Guide - Revision 1

Station Ring

This feature allows you to assign an incoming call ring pattern. The ring
patterns can differ for an internal incoming call or an external incoming
call.
To change the Station Ring pattern, press FNC+3+4+3. A Station Ring
Step 1
Pattern dialog box displays
STN Ring
[1]L1
[2]L2
Select L1 or L2* by using the Scroll
Step 2
systems, a Station Ring Options dialog box displays
STN Ring
1 2 3 4 5 6 7 8
Press the Scroll
Step 3
different Station Ring Pattern.
Press the FNC key to confirm.
Step 4
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
The default Station Ring pattern is 1.
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
(Figure 3-39).
or Scroll
or Scroll keys, or the number key to select a
Using the PSIII 3-33
keys. For Mode 2*
(Figure 3-40).