Destination Dialog Box; Display Dialog Box; Digits Dialog Box - NEC Dterm PSIII User Manual

Figure 3-51 Destination dialog box
Figure 3-52 Display dialog box
Figure 3-53 Digits dialog box
Dterm PSIII User Guide - Revision 1
Call Forwarding Destination
A forwarding destination number and name must be assigned before
setting this feature.
Press FNC+3+5+5. A Destination dialog box displays
Step 1
Destination
[1]Set
[2]Reset
Select [1] Set.
Step 2
Press the FNC key or 1. A Display dialog box displays
Step 3
Display?
Type in the destination name. Refer to
Step 4
Press the FNC key. A Digits dialog box displays
Step 5
Digits?
Type in the number and then press the FNC key twice to confirm the
Step 6
entry.
After the registration is complete, a setting tone will ring and then the
PSIII returns to a standby state after two seconds.
Using the PSIII
(Figure 3-51).
(Figure
Table 3-3 on page 3-17.
(Figure 3-53).
3-41
3-52).